Effects of Chromate and Molybdate on Stress Corrosion Cracking of Type 304 Austenitic Stainless Steel in Hydrochloric Acid Solution
Authors:
- SundjonoSUSundjono
- 1 April 2000
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 56 (4) , 361-370
Abstract
Stress corrosion cracking (SCC) of a commercial austenitic stainless steel Type 304 (UNS S30400) was investigated as a function of inhibitor concentration (chromate and molybdate), applied stress, and test temperature in 0.82 kmol/m3 hydrochloric acid (HCl) solution by using a constant load method. Applied stress vs time-to-failure curves were divided into three regions that were dominated by either stress, SCC, or corrosion, except for the case with high chromate concentrations of > 0.9 kmol/m3. In the SCC-dominated region, the logarithm of the steady-state elongation rate, which was obtained from the corrosion elongation curve (elongation vs time), was a linear function of the logarithm of time-to-failure, irrespective of chromate and molybdate concentrations, applied stress, and test temperature. This result showed that the steady-state elongation rate became a useful parameter for prediction of time-to-failure. In addition, the roles of chromate and molybdate in SCC were discussed in terms of the ability of passivation and ion-selective property.Keywords
This publication has 11 references indexed in Scilit:
- Effect of Specimen Width on Stress Corrosion Cracking of Type 304 Stainless SteelCorrosion, 1993
- The effect of potential on stress corrosion cracking of type 316 and type 310 austenitic stainless steelsCorrosion Science, 1993
- Stress Corrosion Cracking of Type 430 Ferritic Stainless Steel in Chloride and Sulfate SolutionsCorrosion, 1992
- A Competitive Adsorption Model for the Inhibition of Crevice Corrosion and PittingJournal of the Electrochemical Society, 1990
- Surface analysis of passive stateCorrosion Science, 1990
- Stress Corrosion Cracking of AISI 304 and AISI 316 Austenitic Stainless Steels in HCl and H2SO4 Solutions — Prediction of Time-to-Failure and Criterion for Assessment of SCC SusceptibilityCorrosion, 1989
- A Bipolar Model of the Passivity of Stainless Steel: The Role of Mo AdditionJournal of the Electrochemical Society, 1986
- Corrosion Inhibition1981
- An X-ray photo-electron spectroscopic study on the role of molybdenum in increasing the corrosion resistance of ferritic stainless steels in HC1Corrosion Science, 1979
- The effect of molybdate anion on the ion-selectivity of hydrous ferric oxide films in chloride solutionsCorrosion Science, 1977