Analysis of the Influence of the Motion State of Ultra-Thin Sapphire Based on Layer-Stacked Clamping (LSC)
Open Access
- 26 May 2023
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 14 (6) , 1124
Abstract
Ultra-thin sapphire wafer processing is receiving increasing attention in the LED substrate industry. In the cascade clamping method, the motion state of the wafer determines the uniformity of material removal, while the motion state of the wafer is related to its friction coefficient in the biplane processing system, but there is little relevant literature discussing the relationship between the motion state of wafer and friction coefficient. In this study, an analytical model of the motion state of sapphire wafers in the layer-stacked clamping process based on the frictional moment is established, the effect of each friction coefficient on its motion is discussed, the base plate of different materials and different roughness are experimentally studied, the layer-stacked clamping fixture is prepared in this way, and finally the failure form of the limiting tab is analyzed experimentally. The theoretical analysis shows that the sapphire wafer is mainly driven by the polishing plate, while the base plate is mainly driven by the holder, and the rotation speed of the two is not the same; the material of the base plate of the layer-stacked clamping fixture is stainless steel, the material of the limiter is glass fiber plate, and the main form of failure of the limiter is to be cut by the edge of the sapphire wafer and damage the material structure.Keywords
Funding Information
- Basic Research Project of Wenzhou City, China (G20210002, G20210001, LQ23E050003, LQ22E050008)
- Natural Science Foundation of Zhejiang Province, China (G20210002, G20210001, LQ23E050003, LQ22E050008)
This publication has 25 references indexed in Scilit:
- Sapphire shaped crystals for waveguiding, sensing and exposure applicationsProgress in Crystal Growth and Characterization of Materials, 2018
- Evaluation of Double-Sided Planetary Grinding Using Diamond Wheels for Sapphire SubstratesCrystals, 2018
- Study on the double-sided grinding of sapphire substrates with the trajectory methodPrecision Engineering, 2018
- Nd 3+ -doped colloidal SiO 2 composite abrasives: Synthesis and the effects on chemical mechanical polishing (CMP) performances of sapphire wafersApplied Surface Science, 2017
- Optimization Method for Double-sided Polishing Process based on Kinematical AnalysisProcedia CIRP, 2016
- Fe-Nx/C assisted chemical–mechanical polishing for improving the removal rate of sapphireApplied Surface Science, 2015
- Modern trends in crystal growth and new applications of sapphireJournal of Crystal Growth, 2012
- Study on sapphire removal for thin-film LEDs fabrication using CMP and dry etchingApplied Surface Science, 2009
- Achievement of High Flatness of Large Diameter Silicon Wafer in Double-Sided Polishing: Optimization of Polishing Conditions Considering Relative Motion Direction2009
- Boron suboxide: As hard as cubic boron nitrideApplied Physics Letters, 2002