A High-Efficiency Helical Core for Magnetic Field Energy Harvesting
- 15 September 2016
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 32 (7) , 5365-5376
Abstract
Real-time data of high-voltage infrastructures collected by wireless sensors are the foundation of many smart grid applications. Energy harvesting can be an effective solution for autonomous, self-powered wireless sensors. In this paper, a coil with a novel helical core is proposed and optimized to scavenge the magnetic field energy efficiently near equipment carrying large currents. Due to the special design of the helical core, the path of the magnetic flux inside the core can be significantly increased, which leads to a reduction of the demagnetizing field. Therefore, the proposed core can generate a much higher flux density (hence more power) compared with conventional designs. The selection of the core material is studied and itis found that high permeability ferrite is the most suitable material. Experimental results show that the proposed helical coil with only 400 turns of wire can have a power density of 2.1 μW/cm 3 when placed in a magnetic flux density of 7 μTrm s. This value is bigger than any of the existing designs if placed in the same magnetic field. If more wires can be wound on the core, an even higher power density could be obtained. Therefore, the proposed design is a very efficient method for scavenging the magnetic field energy for a wide range of smart grid applications.Keywords
This publication has 24 references indexed in Scilit:
- Magnetic Field Energy Harvesting from AC Lines for Powering Wireless Sensor Nodes in Smart GridsIEEE Transactions on Industrial Electronics, 2016
- Power loss analysis with high primary current in magnetic energy harvesters2015
- Power Electronic Circuits for Magnetic Energy HarvestersIEEE Transactions on Power Electronics, 2015
- Analysis Model for Magnetic Energy HarvestersIEEE Transactions on Power Electronics, 2014
- Optimization of Voltage Doublers for Energy Harvesting ApplicationsIEEE Sensors Journal, 2013
- Harvesting Energy From Magnetic Fields to Power Condition Monitoring SensorsIEEE Sensors Journal, 2013
- Smart “Stick-on” Sensors for the Smart GridIEEE Transactions on Smart Grid, 2011
- Energy Harvesting of Magnetic Power-Line NoiseIEEE Transactions on Magnetics, 2011
- Strong and Weak Electric Field Interfering: Capacitive Icing Detection and Capacitive Energy Harvesting on a 220-kV High-Voltage Overhead Power LineIEEE Transactions on Industrial Electronics, 2010
- A scoping study of electric and magnetic field energy harvesting for wireless sensor networks in power system applications2009