A nonlinear control method for resin transfer molding
Authors:
- 1 June 1997
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 18 (3) , 412-417
Abstract
In performing permeability measurements on the fiber reinforced preforms typically used in the resin transfer molding (RTM) process, two types of fluid injection are commonly utilized: constant fluid pressure and constant fluid flow rate. The constant pressure condition is often enforced by placing the test fluid within a pressure pot and supplying a constant gas pressure, thereby forcing the fluid into the mold under a constant pressure. In the case of constant fluid flow rate, the fluid is often supplied by forcing a piston through a fluid‐filled cylinder at a constant rate of displacement through the use of a press or Instron machine. This paper presents a nonlinear control method for providing constant flow rate RTM processes with a pressure pot solely through the use of a regulator. Computer simulations of the control examined the effect of various parameters on the ability to maintain constant flow rate. Rectilinear flow experiments were carried out to evaluate the theoretical development. Experimental results are in good agreement with the computer simulations. Both computer simulations and experiments show significant promise for the proposed control methodology.Keywords
This publication has 16 references indexed in Scilit:
- Modelling and simulation of resin transfer moulding (RTM)—gate control, venting and dry spot predictionComposites Part A: Applied Science and Manufacturing, 1996
- In situ cure monitoring of advanced fiber reinforced composites1995
- Analysis of non-isothermal mold filling process in resin transfer molding (RTM) and structural reaction injection molding (SRIM)Computational Mechanics, 1995
- A numerical approach to model non‐isothermal viscous flow through fibrous media with free surfacesInternational Journal for Numerical Methods in Fluids, 1994
- In situ sensor monitoring and intelligent control of the resin transfer molding processPolymer Composites, 1994
- Neural network-based control for the fiber placement composite manufacturing processJournal of Materials Engineering and Performance, 1993
- Predictive control of quality in a batch manufacturing process using artificial neural network modelsIndustrial & Engineering Chemistry Research, 1993
- A finite element/control volume approach to mold filling in anisotropic porous mediaPolymer Composites, 1990
- Resin impregnation during composites manufacturing: Theory and experimentationComposites Science and Technology, 1989
- Resin Impregnation During the Manufacturing of Composite Materials Subject to Prescribed Injection RateJournal of Reinforced Plastics and Composites, 1988