Preparation of Designed Poly(trimethylene carbonate) Meniscus Implants by Stereolithography: Challenges in Stereolithography
- 17 October 2016
- journal article
- research article
- Published by Wiley in Macromolecular Bioscience
- Vol. 16 (12) , 1853-1863
Abstract
Three‐armed poly(trimethylene carbonate) macromers with a relatively high molecular weight of 28.9 kg mol−1 are prepared by ring opening polymerization and subsequent functionalization with methacrylate end groups. A resin suitable for processing by stereolithography is developed using propylene carbonate as a diluent, a photoinitiator, and a dye to control the curing characteristics. The difficulties in building designed structures with digital light processing stereolithography and the ways of optimizing the resin compositions are described in detail. Using an optimized resin composition, which contained 50 wt% macromer, 50 wt% diluent, 0.05 wt% (relative to the macromer) dye, and 5 wt% (relative to the macromer) photoinitiator, designed 3D porous structures with a gyroid pore network geometry are manufactured. By varying pore sizes and porosities between, respectively, 300 and 1000 μm and 60% and 90%, cylindrical porous poly(trimethylene carbonate) network structures with compression moduli of 85–2320 kPa are prepared. A porous poly(trimethylene carbonate) network meniscus implant is designed on the basis of computed tomography imaging data. By adjusting the characteristics of the gyroid pore architecture, an implant with a compression modulus close to 400 kPa, which fits the compression modulus of human meniscal tissue, is manufactured by stereolithography. imageKeywords
Funding Information
- Stichting voor de Technische Wetenschappen (12410)
- Stichting voor de Technische Wetenschappen (12410)
This publication has 27 references indexed in Scilit:
- Microfabrication of complex porous tissue engineering scaffolds using 3D projection stereolithographyBiomaterials, 2012
- Continuous digital light processing (cDLP): Highly accurate additive manufacturing of tissue engineered bone scaffoldsVirtual and Physical Prototyping, 2012
- Preparation of Flexible and Elastic Poly(trimethylene carbonate) Structures by StereolithographyMacromolecular Bioscience, 2011
- Mathematically defined tissue engineering scaffold architectures prepared by stereolithographyBiomaterials, 2010
- A review on stereolithography and its applications in biomedical engineeringBiomaterials, 2010
- A poly(d,l-lactide) resin for the preparation of tissue engineering scaffolds by stereolithographyBiomaterials, 2009
- Poly(propylene fumarate) Bone Tissue Engineering Scaffold Fabrication Using Stereolithography: Effects of Resin Formulations and Laser ParametersBiomacromolecules, 2007
- Laser‐layered microfabrication of spatially patterned functionalized tissue‐engineering scaffoldsJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2005
- Rapid Prototyping of Tissue-Engineering Constructs, Using Photopolymerizable Hydrogels and StereolithographyTissue Engineering, 2004
- Meniscal tissue regeneration in porous 50/50 copoly(l-lactide/ε-caprolactone) implantsBiomaterials, 1997