Using KRF Structures As An Adaptive Facade And Evaluation of Daylight Performance Based on Geometry: A Case Study in Ankara
Open Access
- 27 December 2023
- journal article
- research article
- Published by Penerbit UTM Press in International Journal of Built Environment and Sustainability
- Vol. 11 (1) , 1-13
Abstract
Adaptive facades are widely used today because they are energy efficient and sustainable. It is expected that kinetic facades will become more common in the future and new geometries are constantly sought. Kinetic Reciprocal Frame (KRF) structures are also one of the innovative and sustainable approaches. In this study, KRF structures are used as adaptive facades and are analyzed in two stages. As a test model, a standard high-rise office building in Ankara, Turkey is created and simulations are made on the south facade. In the first stage, the modules’ applicability in different geometries is examined and the differences within the geometries are revealed. KRF modules are examined for cost-effectiveness and mobility. In the second stage, analyzes are made on the daylight performance of the geometries. Modules are evaluated based on spatial daylight autonomy (sDA), annual sunlight exposure (ASE), and average lux. As a result, in terms of daylight performance, the hexagonal KRF module gives the best result by drawing the most homogeneous values due to its high mobility. However, it is noticed that the daylight performance of the triangle KRF module is weak compared to other modules, the ASE values cannot be controlled and it is more difficult to implement because it is not effective in terms of cost per module. The fact that hexagonal modules give good results in terms of cost is found to be good in support of it. This study is also valuable study in terms of the application performance of KRF structures on the facade.Keywords
This publication has 16 references indexed in Scilit:
- Geometric Feasibility of Kinetic Reciprocal Frame Structures with Linear and Curved Elements and a Constant PerimeterJournal of Architectural Engineering, 2022
- Sustainability-Related Parameters and Decision Support Tools for Kinetic Green FaçadesSustainability, 2021
- Hybrid kinetic facade: fabrication and feasibility evaluation of full-scale prototypesArchitectural Engineering and Design Management, 2021
- Design challenges of reciprocal frame structures in architectureJournal of Building Engineering, 2019
- Patterns of façade system design for enhanced energy performance of multistory buildingsEnergy and Buildings, 2016
- Parametric-based designs for kinetic facades to optimize daylight performance: Comparing rotation and translation kinetic motion for hexagonal facade patternsSolar Energy, 2016
- Kinetic Solar Skin: A Responsive Folding TechniqueEnergy Procedia, 2015
- Reciprocal Frame (RF) Structures: Real and ExploratoryNexus Network Journal, 2014
- Structural Reciprocity: Critical Overview and Promising Research/Design IssuesNexus Network Journal, 2014
- Building façade design for daylighting quality in typical government office buildingBuilding and Environment, 2012