Microstructural Characterization and Mechanical Behavior of NiTi Shape Memory Alloys Ultrasonic Joints Using Cu Interlayer
Open Access
- 26 September 2018
- Vol. 11 (10) , 1830
Abstract
NiTi shape memory alloys (SMAs) are a class of functional materials which can be significantly deformed and recover their original shape via a reversible martensitic phase transformation. Developing effective joining techniques can expand the application of SMAs in the medical and engineering fields. In this study, ultrasonic spot welding (USW), a solid-state joining technique, was used to join NiTi sheets using a Cu interlayer in between the two joining sheets. The influence of USW process on the microstructural characteristics and mechanical behavior of the NiTi joints was investigated. Compared with conventional fusion welding techniques, no intermetallic compounds formed in the joints, which is extreme importance for this particular class of alloys. The joining mechanisms involve a combination of shear plastic deformation, mechanical interlocking and formation of micro-welds. A better bonding interface was obtained with higher welding energy levels, which contributed to a higher tensile load. An interfacial fracture mode occurred and the fracture surfaces exhibited both brittle and ductile-like characteristics with the existence of tear ridges and dimples. The fracture initiated at the weak region of the joint border and then propagated through it, leading to tearing of Cu foil at the fracture interface.Keywords
Funding Information
- National Key R&D Program of China (2018YFB1107900)
- National Natural Science Foundation of China (51775091, 51575383)
- Natural Science Foundation of Tianjin Municipality (18JCQNJC04100)
- Sichuan Provincial Science and Technology Support Program (2018GZ0284)
- Fundação para a Ciência e a Tecnologia (PEst-OE/EME/UI0667/2014)
This publication has 47 references indexed in Scilit:
- A revisit to atomistic rationale for slip in shape memory alloysProgress in Materials Science, 2017
- Laser welding of NiTi shape memory alloy wires and tubes for multi-functional design applicationsSmart Materials and Structures, 2016
- A review of constitutive models and modeling techniques for shape memory alloysInternational Journal of Plasticity, 2016
- Metallic implant biomaterialsMaterials Science and Engineering: R: Reports, 2015
- A review of shape memory alloy research, applications and opportunitiesMaterials & Design (1980-2015), 2014
- Laser welding of TiNi shape memory alloy and stainless steel using Ni interlayerMaterials & Design (1980-2015), 2012
- Physical metallurgy of Ti–Ni-based shape memory alloysProgress in Materials Science, 2005
- Fabrication and characterization of Ti–Ni shape memory thin film using Ti/Ni multilayer techniqueScience and Technology of Advanced Materials, 2005
- Mechanical behaviour of shape memory alloys for seismic applications 2. Austenite NiTi wires subjected to tensionInternational Journal of Mechanical Sciences, 2001
- Effect of thermal cycling on the transformation temperatures of TiNi alloysActa Metallurgica, 1986