Fabrication of a micro-nanostructured superhydrophobic aluminum surface with excellent corrosion resistance and anti-icing performance
- 16 August 2016
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (83) , 79389-79400
Abstract
In this paper, a superhydrophobic aluminum (Al) surface with a hierarchical micro-nanostructure was successfully fabricated via anodization followed by surface modification using 1H,1H,2H,2H-perfluorodecyltriethoxysilane (FAS). The as-prepared superhydrophobic surface (SHS) displays a water contact angle (CA) as high as 156.0 ± 0.7° and a sliding angle (SA) as low as 2.5 ± 1.4°. The surface is found to have good mechanical stability against sand erosion and chemical durability in a series of solutions. The SHS also demonstrates a decrease of 3 orders of magnitude in the corrosion current density (Jcorr) and significant positive shift of 0.93 V in the corrosion potential (Ecorr). In addition, the SHS shows a delay in icing time and temperature, as well as low ice adhesion at 0.04 ± 0.02 MPa. The facile process and the achieved surface morphology provide an attractive way towards anti-wetting surfaces for corrosion protection and anti-icing applications for other structural materials.Keywords
This publication has 86 references indexed in Scilit:
- Anti-icing Potential of Superhydrophobic Ti6Al4V Surfaces: Ice Nucleation and GrowthLangmuir, 2015
- Fabrication and anti-icing property of coral-like superhydrophobic aluminum surfaceApplied Surface Science, 2015
- Development of Sol–Gel Icephobic Coatings: Effect of Surface Roughness and Surface EnergyACS Applied Materials & Interfaces, 2014
- Effect of wettability and surface roughness on ice-adhesion strength of hydrophilic, hydrophobic and superhydrophobic surfacesApplied Surface Science, 2014
- Superhydrophilic Polyelectrolyte Brush Layers with Imparted Anti-Icing Properties: Effect of Counter ionsACS Applied Materials & Interfaces, 2014
- Facile approach in the development of icephobic hierarchically textured coatings as corrosion barrierApplied Surface Science, 2014
- Fabrication of superhydrophobic aluminium alloy surface with excellent corrosion resistance by a facile and environment-friendly methodApplied Surface Science, 2013
- Anti-icing and de-icing techniques for wind turbines: Critical reviewCold Regions Science and Technology, 2011
- AC flashover performance of insulators covered with artificial iceIEEE Transactions on Power Delivery, 1995
- Flashover Performance of Artificially Contaminated and ICED Long-Rod Transmission Line InsulatorsIEEE Transactions on Power Apparatus and Systems, 1980