Effects of Shrinkage Reducing Agent and Expansive Additive on Mortar Properties
Open Access
- 12 October 2017
- journal article
- research article
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2017, 1-11
Abstract
This research is to study the effect of mortar mixed with shrinkage reducing agent (polyoxyalkylene alkyl ether type), expansive additive (CaO type), and fly ash (hereinafter “SRA,” “EX,” and “FA,” resp.). Moreover, steam curing was studied to improve the properties of mortar. The plastic shrinkage test was conducted by using the strain gauge embedded at 0.5 cm from the surface according to the ASTM C1579-06 standard within early age followed by the total shrinkage test and compressive strength test. The test results showed that mixing both the EX and SRA increases the plastic enlargement of the mortar during the early age more than using either the EX or SRA solely. The steam curing helps to reduce the plastic shrinkage when the mortar is added with the FA and SRA while adding the EX increases the enlargement compared to the normal curing. When the EX, SRA, and FA are all added to the mortar mixing, great attention should be paid due to the increase of greater enlargement. For the compressive strength view, the steam curing increases the compressive strength in all types of mixture. The steam curing significantly helps increasing the compressive strength of mortar with combination of EX, SRA, and FA. Nevertheless, the XRD and SEM tests explain such enlargement accordingly.Keywords
Funding Information
- King Mongkut’s Institute of Technology Ladkrabang (15 (2014))
This publication has 26 references indexed in Scilit:
- Influence of cement and expansive additive types in the performance of self-stressing and self-compacting concretes for structural elementsConstruction and Building Materials, 2015
- Effect of steam curing cycles on strength and durability of SCC: A case study in precast concreteConstruction and Building Materials, 2013
- Influence of Mineral Admixtures on the Short and Long-term Performance of Steam-cured ConcreteEnergy Procedia, 2012
- Effect of SRA on the expansive behaviour of mortars based on sulphoaluminate agentCement and Concrete Composites, 2011
- Influence of shrinkage-reducing admixtures on plastic and long-term shrinkageCement and Concrete Composites, 2011
- Shrinkage of plain and silica fume cement concrete under hot weatherCement and Concrete Composites, 2007
- Shrinkage Characteristics of Cement Paste and Mortar at Very Early AgesJournal of the Society of Materials Science, Japan, 2007
- Drying Shrinkage of Concrete Combining Expansive Additives and Shrinkage Reducing AgentJournal of the Korea Concrete Institute, 2006
- Effect of steam curing on class C high-volume fly ash concrete mixturesCement and Concrete Research, 2005
- Cracking risks associated with early age shrinkageCement and Concrete Composites, 2004