Effect of High-Pressure Hydrogen Gas on Fracture of Austenitic Steels
Authors:
- 20 August 2008
- journal article
- Published by ASME International in Journal of Pressure Vessel Technology
- Vol. 130 (4) , 041401
Abstract
Applications requiring the containment and transportation of hydrogen gas at pressures greater than are anticipated in the evolving hydrogen economy infrastructure. Since hydrogen is known to alter the mechanical properties of materials, data are needed to guide the selection of materials for structural components. The objective of this study is to characterize the role of yield strength, microstructural orientation, and small concentrations of ferrite on hydrogen-assisted fracture in two austenitic stainless steels: 21Cr–6Ni–9Mn (21-6-9) and 22Cr–13Ni–5Mn (22-13-5). The testing methodology involves exposure of tensile specimens to high-pressure hydrogen gas at elevated temperature in order to precharge the specimens with hydrogen, and subsequently testing the specimens in laboratory air to measure strength and ductility. In all cases, the alloys remain ductile despite precharging to hydrogen concentrations of , as demonstrated by reduction in area values between 30% and 60% and fracture modes dominated by microvoid processes. Low concentrations of ferrite and moderate increases in yield strength do not exacerbate hydrogen-assisted fracture in 21-6-9 and 22-13-5, respectively. Microstructural orientation has a pronounced effect on ductility in 22-13-5 due to the presence of aligned second-phase particles.
Keywords
This publication has 23 references indexed in Scilit:
- Permeability, solubility and diffusivity of hydrogen isotopes in stainless steels at high gas pressuresInternational Journal of Hydrogen Energy, 2007
- H- and tritium-assisted fracture in N-strengthened, austentitic stainless steelJOM, 2003
- Improvement of formability of leaded α brass during hot workingMaterials Science and Technology, 1999
- Effect of strain-induced martensite on hydrogen environment embrittlement of sensitized austenitic stainless steels at low temperaturesActa Materialia, 1998
- Morphology and orientation relationship of Z-phase in austeniteScripta Metallurgica et Materialia, 1991
- Hydrogen compatibility handbook for stainless steels1983
- Hydrogen effects on the tensile properties of 21-6-9 stainless steelMetallurgical Transactions A, 1982
- The Tensile Ductility of Austenitic Steels in Air and HydrogenJournal of Engineering Materials and Technology, 1977
- On the thermo-mechanical behavior and hydrogen compatibility of 22-13-5 stainles steelMaterials Science and Engineering, 1975
- Hydrogen embrittlement of metalsMaterials Science and Engineering, 1972