Performance evaluation of hydrophilic organic polymer sorbents for desiccant air-conditioning applications
Open Access
- 13 February 2017
- journal article
- research article
- Published by SAGE Publications in Adsorption Science & Technology
- Vol. 36 (1-2) , 311-326
Abstract
The present study provides performance evaluation of two kinds of crosslinked hydrophilic organic polymer sorbents (PS-I and PS-II) for desiccant air-conditioning applications. In this regard, optimum temperature and humidity zones are established for various air-conditioning applications which include (i) humans’ thermal comfort, (ii) animals’ thermal comfort, and (iii) postharvest storage of fruits/vegetables. Honeycomb-like desiccant blocks composed of PS-I/PS-II are assumed for numerical simulation analysis. The numerical simulation model is programmed into MATLAB which utilizes the scientific relationships of adsorption isotherms, adsorption kinetics, isosteric heat of adsorption, and thermophysical properties for each sorbent. A particular desiccant air-conditioning system design is proposed, and numerical simulation has been conducted for the performance evaluation of PS-I and PS-II. According to the results, PS-I enables higher dehumidification than PS-II at low regeneration temperature (50℃) and cycle time of 60:90 min. It is because the PS-I possesses better water vapor sorption kinetics as compared to PS-II. Although the PS-II enabled higher steady-state adsorption amount but it could not influence the overall system performance. On the other hand, the optimum performance by the PS-II is limited to relatively long cycle time and higher regeneration temperature (≥80℃). It has been concluded that the PS-I is relatively better choice for desiccant air-conditioning, and consequently can be considered for various air-conditioning applications. Furthermore, effects of mass flow rate, isosteric heat of adsorption, regeneration temperature, and cycle time on air humidity ratio and air temperature profiles have been discussed in order to highlight the performance variability of desiccant air-conditioning system.Keywords
This publication has 18 references indexed in Scilit:
- Overview of the Maisotsenko cycle – A way towards dew point evaporative coolingRenewable and Sustainable Energy Reviews, 2016
- Application of zeolitic materials prepared from fly ash to water vapor adsorption for solar coolingApplied Energy, 2012
- Experimental investigation on the performance of radial flow desiccant bed using activated aluminaApplied Thermal Engineering, 2011
- Simulation, performance analysis and optimization of desiccant wheelsEnergy and Buildings, 2010
- Cross-Contamination Test of an Enthalpy Wheel Loading a Strong Acidic Cation Ion-Exchange Resin or 3A Zeolite as a Desiccant MaterialJOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 2010
- Desiccant cooling air conditioning: a reviewRenewable and Sustainable Energy Reviews, 2006
- Adsorption of Water Vapor by Homoionic Montmorillonites. Heats of Adsorption and DesorptionJournal of Colloid and Interface Science, 1997
- Desiccant solar air conditioning in tropical climates: I—Dynamic experimental and numerical studies of silicagel and activated aluminaSolar Energy, 1994
- The performance of a solar-regenerated open-cycle desiccant bed grain cooling systemSolar Energy, 1991
- Modifications of the Brunauer, Emmett and Teller Equation1Journal of the American Chemical Society, 1946