Surface characterization of air plasma treated poly vinylidene fluoride and poly methyl methacrylate films
Authors:
Open Access
- 13 February 2009
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 49 (4) , 808-818
Abstract
In this investigation, the surface modification of poly vinylidene fluoride (PVDF) and poly methyl methacrylate (PMMA) film induced by air plasma has been investigated using contact angle measurement, electron spectroscopy for chemical analysis (ESCA), and ATR‐FTIR spectroscopy. Plasma treatment affects the polymer surfaces to an extent of several hundreds to several thousand angstroms deep, and the bulk properties of the polymer substrate are never modified because of its low penetration range. Plasma surface treatment also offers the advantage of greater chemical flexibility. The plasma exposure leads to weight loss and changes in the chemical composition of the polymer film surfaces. The contact angle of water shows decrease in surface wettability of PVDF and PMMA as the treatment time increases. The improvement in adhesion was studied by measuring T‐peel strength. In addition, printability of plasma treated PVDF and PMMA was studied by cross test method. It was found that printability increases considerably for plasma treatment of short duration. Surface energy and surface roughness can be directly correlated to the improvement in the aforementioned surface related properties. POLYM. ENG. SCI., 2009. © 2009 Society of Plastics EngineersKeywords
This publication has 44 references indexed in Scilit:
- A new approach for selective surface modification of fluoropolymers by remote plasmasJournal of Applied Polymer Science, 2004
- The mechanism of adhesion and printability of plasma processed PET filmsMaterials Research Innovations, 2003
- Cold plasma treatment of polypropylene surface: a study on wettability and adhesionJournal of Materials Processing Technology, 2002
- Mechanism of the immobilization of surfactants on polymeric surfaces by means of an argon plasma treatment: Influence of the chemical structure of surfactant and substrateJournal of Polymer Science Part A: Polymer Chemistry, 1998
- Influence of plasma treatment on the molar mass of poly(ethylene terephthalate) investigated by different chromatographic and spectroscopic methodsJournal of Polymer Science Part A: Polymer Chemistry, 1998
- Equilibrium Contact Angle for Polymer/Polymer InterfacesMacromolecules, 1995
- Surface modification of plasma-pretreated poly(tetrafluoroethylene) films by graft copolymerizationMacromolecules, 1993
- Plasma surface modification of polymers for improved adhesion: a critical reviewJournal of Adhesion Science and Technology, 1993
- Effect of plasma treatment of PTFE substrates on the adhesion characteristics of vacuum-deposited Au filmsJournal of Adhesion Science and Technology, 1993
- The effects of functional group mobility on quantitative ESCA of plasma modified polymer surfacesSurface and Interface Analysis, 1981