Film Thickness in Elastohydrodynamically Lubricated Slender Elliptic Contacts: Part II – Experimental Validation and Minimum Film Thickness
Authors:
- 9 March 2022
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 236 (12) , 2477-2490
Abstract
In the first paper of this series, a new formula for central film thickness of slender contacts has been proposed. In this paper, interferometry measurement of the film thickness in slender elliptic contacts is performed for comparison with film thickness distribution of EHL simulation. The new film thickness formula presented in part I of this paper series is successfully validated by comparison with the experimental data. State-of-the-art minimum film thickness formulas are compared with the experimental results and results obtained through a multilevel EHL solver. Significant deviation of the analytical minimum film thickness formulas regarding both numerical and experimental results is given. Therefore, an alternative approach for calculation of minimum film thickness via the film thickness ratio with central film thickness is proposed, which yields promising results for moderately slender elliptic EHL contacts.Keywords
This publication has 46 references indexed in Scilit:
- Film thickness prediction in elastohydrodynamically lubricated elliptical contactsProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2010
- Elastohydrodynamics of a Worm Gear ContactJournal of Tribology, 2000
- Experimental Evaluation of EHD Film Shape and Its Comparison With Numerical SolutionJournal of Tribology, 2000
- An Automatic System for Real-Time Evaluation of EHD Film Thickness and Shape Based on the Colorimetric InterferometryTribology Transactions, 1999
- Wildhaber-Novikov Circular Arc Gears: ElastohydrodynamicsJournal of Tribology, 1993
- The Isothermal Elastohydrodynamic Lubrication of SpheresJournal of Lubrication Technology, 1981
- Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part III—Fully Flooded ResultsJournal of Lubrication Technology, 1977
- Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part IV—Starvation ResultsJournal of Lubrication Technology, 1977
- Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part II—Ellipticity Parameter ResultsJournal of Lubrication Technology, 1976
- Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part 1—Theoretical FormulationJournal of Lubrication Technology, 1976