Establishing Boundary Conditions Considering Influence Factors of the Room Equipped with a Ceiling Radiant Cooling Panel
Open Access
Abstract
The objective of this study is to establish boundary conditions to evaluate the cooling capacity of the Cooling Radiant Ceiling Panel (CRCP) considering the environment of a room equipped with the CRCP. The current study investigated the boundary conditions and derivation techniques from previous studies. Based on the results of the analysis, a heat transfer model was derived for a room fitted with CRCP. In addition, the heat transfer model was used to derive the factors affecting the cooling capacity of the CRCP and each factor was simulated and verified through this model. The effects of these factors on the capacity of the CRCP was established by using various boundary conditions. To verify the validity of the simulation model, the experimental results were compared with the cooling capacity for a specific case. As a result, it was established that even for the same panel, there was a variance in the cooling capacity of the CRCP based on the boundary conditions and that the influence of the surface exposed to the outdoors had more implications. Consequently, this study presents the influence factors to be considered when designing CRCP.Keywords
Funding Information
- Korea Institute of Energy Technology Evaluation and Planning (20189220100060)
- Ministry of Trade, Industry and Energy (20189220100060)
This publication has 14 references indexed in Scilit:
- An Experiment for Estimating the Cooling Capacity of the Radiant Ceiling Panel SystemJournal of the architectural institute of Korea planning & design, 2014
- DIGITHON: A numerical model for the thermal balance of rooms equipped with radiant systemsBuilding and Environment, 2012
- Research on the actual cooling performance of ceiling radiant panelEnergy and Buildings, 2012
- Experimental study of thermal condition in a room with hydronic cooling radiant surfacesInternational Journal of Refrigeration, 2011
- Radiant ceiling systems coupled to its environment part 1: Experimental analysisApplied Thermal Engineering, 2010
- Strategies for flow rate balancing in radiant floor heating systemsBuilding Research & Information, 2008
- Simplified cooling capacity estimation model for top insulated metal ceiling radiant cooling panelsApplied Thermal Engineering, 2004
- Ceiling radiant cooling panel capacity enhanced by mixed convection in mechanically ventilated spacesApplied Thermal Engineering, 2003
- Thermal comfort and energy consumption of the radiant ceiling panel system.Energy and Buildings, 1999
- Experimental evaluation of energy savings in air-conditioning using metal ceiling panelsApplied Thermal Engineering, 1998