Wide Gap Braze Repair of Gas Turbine Blades and Vanes—A Review
- 28 October 2011
- journal article
- review article
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 134 (1) , 010801
Abstract
Gas turbine blades and vanes in modern gas turbines are subjected to an extremely hostile environment. As such, sophisticated airfoil designs and advanced materials have been developed to meet stringent demands and at the same time, ensure increased performance. Despite the evolution of long-life airfoils, damage still occurs during service thus limiting the useful life of these components. Effective repair of after-service components provides life-cycle cost reduction of engines, and as well, contributes to the preservation of rare elements heavily used in modern superalloys. Among these methods developed in the last four decades for the refurbishment and joining of superalloy components, wide gap brazing (WGB) technology has been increasingly used in the field owing to its ability to repair difficult to weld alloys, to build up substantially damaged areas in one operation, and to provide unlimited compositional choices to enhance the properties of the repaired region. In this paper, the historical development of wide gap repair technology currently used in industry is reviewed. The microstructures and mechanical properties of different WGB joints are compared and discussed. Subsequently, different WGB processes employed at major OEMs are summarized. To conclude this review, future developments in WGB repair of newer generations of superalloys are explored.Keywords
This publication has 48 references indexed in Scilit:
- High Strength, Ductile Braze Repairs for Stationary Gas Turbine Components—Part IIJournal of Engineering for Gas Turbines and Power, 2010
- Effect of Tungsten Addition on the Nucleation of Borides in Wide Gap Brazed JointJournal of Engineering for Gas Turbines and Power, 2010
- Fast Epitaxial High Temperature Brazing of Single Crystalline Nickel Based SuperalloysJournal of Engineering for Gas Turbines and Power, 2009
- Wide Gap Braze Repair Using Vertically Laminated Repair SchemeJournal of Engineering for Gas Turbines and Power, 2008
- Brazing and Wide Gap Repair of X-40 Using Ni-Base AlloysJournal of Engineering for Gas Turbines and Power, 2008
- Activated diffusion brazed repair for IN738 hot section components of gas turbinesJournal of Materials Processing Technology, 2001
- Wide gap brazing of stainless steel to nickel-based superalloyJournal of Materials Processing Technology, 2001
- The influence of base metal grain size on isothermal solidification during transient liquid-phase brazing of nickelJournal of Materials Science, 1993
- Improving the cracking resistance of gas turbine structures by replacing welded joints by brazed jointsWelding International, 1988
- Structure of Ni-rich Ni–Cr–B–Si coating alloysJournal of Vacuum Science and Technology, 1975