Investigation of ${\rm SF}_{6}$ Arc Characteristics Under Shock Condition in a Supersonic Nozzle With Hollow Contact
Authors:
- 19 March 2013
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 41 (4) , 915-928
Abstract
Arc-shock interaction and its influence on steady and dynamic characteristics of SF6 arcs in a supersonic nozzle with hollow contact, which is representative of switching arcs in a gas blast high-voltage circuit breaker, are computationally investigated using the magneto-hydro-dynamic theory with fixed inlet stagnation pressures and at five different exit pressure to inlet stagnation pressure ratios (referred to as pressure ratios). The significant quantity in determining the thermal interruption capability of a circuit breaker, i.e., the critical rate of rise of recovery voltage, was predicted and compared with available test results. The deterioration of thermal interruption capability of a supersonic nozzle under shock conditions, which was observed in previous tests is verified and discussed by current arc model. It was found that the close coupling between the shock and the surrounding gas flow can greatly influence the aerodynamic and electrical behavior of a nozzle arc and hence the thermal recovery behavior of current interruption. Additionally, the velocity deceleration caused by the shocks and the enhanced turbulent cooling brought by the sucked gas and arc interaction both pay a significant role in the determination of thermal interruption capability.Keywords
This publication has 39 references indexed in Scilit:
- Theoretical investigation of the decay of an SF6gas-blast arc using a two-temperature hydrodynamic modelJournal of Physics D: Applied Physics, 2013
- Modelling and simulation of radiative energy transfer in high-voltage circuit breakersJournal of Physics D: Applied Physics, 2012
- Thermodynamic and transport properties of two-temperature SF6 plasmasPhysics of Plasmas, 2012
- Improvements of radiative transfer calculation for SF6 thermal plasmasJournal of Physics D: Applied Physics, 2011
- Temperature profiles of an ablation controlled arc in PTFE: I. Spectroscopic measurementsJournal of Physics D: Applied Physics, 2007
- The influence of contacts erosion on the SF6arcJournal of Physics D: Applied Physics, 2006
- Electrode Evaporation and Its Effects on Thermal Arc BehaviorIEEE Transactions on Plasma Science, 2004
- Computational investigation of arc behavior in an auto-expansion circuit breaker contaminated by ablated nozzle vaporIEEE Transactions on Plasma Science, 2002
- A simplified unified theory of arcs and their electrodesJournal of Physics D: Applied Physics, 1997
- Calculations of radiation transfer in SF6plasmas using the method of partial characteristicsJournal of Physics D: Applied Physics, 1994