Superhydrophobic micro-nanofibers from PHBV-SiO2 biopolymer composites produced by electrospinning
Authors:
Open Access
- 24 February 2022
- journal article
- research article
- Published by Springer Nature in Functional Composite Materials
- Vol. 3 (1) , 1-15
Abstract
Electrospinning is a relatively simple technique for producing continuous fibers of various sizes and morphologies. In this study, an intrinsically hydrophilic poly(3-hydroxybutarate-co-3-hydroxyvalerate) (PHBV) biopolymer strain was electrospun from a solution under optimal processing conditions to produce bilayers of beadless micro-fibers and beaded nano-fibers. The fibrous mats produced from the pure PHBV solution exhibited hydrophilicity with complete wetting. Incorporation of polydimethylsiloxane (PDMS) treated silica into the electrospinning solutions resulted in a non-wetting state with increased fiber roughness and enhanced porosity; however, the fiber mats displayed high water droplet-adhesion. The SiO2–incorporated fibrous mats were then treated with stearic acid at an activation temperature of 80 °C. This treatment caused fiber surface plasticization, creating a tertiary hierarchical roughness owing to the interaction of PHBV chains with the polar carboxyl groups of the stearic acid. Scanning electron microscopy was used to assess the influence of the electrospinning process parameters and the incorporation of nanoparticles on surface morphology of the fibers; energy dispersive X-ray spectroscopy confirmed the presence of SiO2 nanoparticles. Fourier transform infrared spectroscopy was performed to study the incorporation of SiO2 and the interaction of stearic acid with PHBV at various concentrations. The chemical interaction between stearic acid and PHBV was confirmed, while SiO2 nanoparticles were successfully incorporated into the PHBV fibers at concentrations up to 4.5% by weight. The incorporation of nanoparticles and plasticization altered the thermal properties of PHBV and a decrease in crystalline fraction was observed. The stearic acid modified bilayers produced from the micro-nano-fibrous composites showed very low water droplet sticking, a roll off angle of approximately 4° and a high static contact angle of approximately 155° were achieved. Graphical AbstractKeywords
Funding Information
- Natural Sciences and Engineering Research Council (RDCPJ543844-19)
This publication has 62 references indexed in Scilit:
- Graphene reinforced biodegradable poly(3-hydroxybutyrate-co-4-hydroxybutyrate) nano-compositesExpress Polymer Letters, 2013
- Improvement of the cytocompatibility of electrospun poly[(R)‐3‐hydroxybutyrate‐co‐(R)‐3‐hydroxyvalerate] mats by EcoflexJournal of Biomedical Materials Research Part A, 2012
- Physical principles of electrospinning (Electrospinning as a nano-scale technology of the twenty-first century)Textile Progress, 2009
- Ultrafine polyacrylonitrile/silica composite fibers via electrospinningMaterials Letters, 2008
- Effects of fumed silica on the crystallization behavior and thermal properties of poly(hydroxybutyrate‐co‐hydroxyvalerate)Journal of Applied Polymer Science, 2008
- Effects of Processing Parameters on the Morphology and Size of Electrospun PHBV Micro- and Nano-FibersKey Engineering Materials, 2007
- Cytocompatibility and Antibacterial Activity of a PHBV Membrane with Surface‐Immobilized Water‐Soluble Chitosan and Chondroitin‐6‐sulfateMacromolecular Bioscience, 2006
- Electrospun nanofibers: solving global issuesMaterials Today, 2006
- Crystallization and Melting Behavior of Poly(3‐hydroxybutyrate)‐Based BlendsMacromolecular Chemistry and Physics, 2004
- Plasticizers2003