Influence of chemical foaming agent on the physical, mechanical, and morphological properties of HDPE/wood flour/nanoclay composites
Authors:
- 20 July 2011
- journal article
- research article
- Published by SAGE Publications in Journal of Reinforced Plastics and Composites
- Vol. 30 (13) , 1115-1124
Abstract
In this study, the effects of chemical foaming agent and nanoclay on the physical, mechanical, and morphological properties of composites based on HDPE and WF were described. To meet this objective, the nanoclay, HDPE and the coupling agent were compounded and granulated and mixed with WF and blowing agent in a twin-screw extruder. Consequently, the foaming process was completed in the injection stage. The amount of WF was fixed at 50 wt% for all samples. For nanoclay (organomodified montmorillonite) and CBA (azodicarbonamide), different levels of 0, 2, 4, 6 per hundred resins (phr) and 0, 0.5, 1, 1.5 phr were considered, respectively. Results indicate that the cell size and the average cell density of samples increased with the increase in the chemical foaming agent content. However, on addition of nanoclay to HDPE/WF composite foams, the cell size was decreased and their cell density increased. SEM confirmed that the chemical foaming agent and nanoclay contents had significant influence on density reduction of foamed composites. Finally, by increase in the chemical foaming agent content, the tensile modulus decreased and the water absorption and thickness swelling of HDPE/WF nanocomposite increased. The nanoclay dispersion quality is quite an important factor for the physical and mechanical properties of both foamed and unfoamed wood plastic nanocomposites. It was found that the optimal condition was attained by incorporating 0.5 phr foaming agent and 4 phr nanoclay in composite formulation.Keywords
This publication has 30 references indexed in Scilit:
- Effect of gas saturation conditions on the expansion ratio of microcellular poly(lactic acid)/wood-flour compositesExpress Polymer Letters, 2010
- Polypropylene Nanocomposites: Effect of Organo-modified Layered Silicates on Mechanical, Thermal & Morphological PerformanceJournal of Thermoplastic Composite Materials, 2008
- Microcellular Foamed Wood‐Plastic Composites by Different Processes: a ReviewMacromolecular Materials and Engineering, 2007
- Morphology and mechanical and viscoelastic properties of rubbery epoxy/organoclay montmorillonite nanocompositesJournal of Applied Polymer Science, 2006
- Effect of Nanoclay on the Mechanical Properties of PMMA/Clay Nanocomposite FoamsJournal of Cellular Plastics, 2006
- Effects of the chemical foaming agents, injection parameters, and melt‐flow index on the microstructure and mechanical properties of microcellular injection‐molded wood‐fiber/polypropylene compositesJournal of Applied Polymer Science, 2005
- Effect of clay orientation on the tensile modulus of polypropylene–nanoclay compositesPolymer, 2004
- Mechanical properties of extrusion‐foamed rigid PVC/wood‐flour compositesJournal of Vinyl and Additive Technology, 2003
- Foaming of PS/wood fiber composites using moisture as a blowing agentPolymer Engineering & Science, 2000
- Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materialsMaterials Science and Engineering: R: Reports, 2000