Influence of silica fume and polypropylene fiber on fracture properties of concrete composite containing fly ash
- 1 December 2011
- journal article
- research article
- Published by SAGE Publications in Journal of Reinforced Plastics and Composites
- Vol. 30 (24) , 1977-1988
Abstract
A parametric experimental study has been conducted to investigate the effect of silica fume and polypropylene fiber on the fracture properties of concrete composite. By means of three-point bending method, the fracture toughness, fracture energy, effective crack length, maximum mid-span deflection, critical crack-opening displacement, and maximum crack-opening displacement of the specimen were measured, respectively, and the relational curves between the vertical load and the mid-span deflection ( Pv– δ), crack mouth-opening displacement ( Pv–CMOD), and crack tip-opening displacement ( Pv–CTOD) were obtained. The results indicate that silica fume and polypropylene fiber both have great effect on the fracture parameters and relational curves of the three-point bending beam specimen. When the content of silica fume increases from 0% to 3%, and the fiber volume fraction increases from 0% to 0.12%, the fracture parameters gradually increase and the fracture relational curves become plumper and plumper with the increase of silica fume content and fiber volume fraction, respectively. However, the fracture parameters begin to decrease and the curves become thinner and thinner after the silica fume content exceeds 3%. It seems that the silica fume contributed well to the improvement of fracture property of concrete composite only when its fume content does not exceed 3%. Furthermore, the capability of polypropylene fiber to resist crack propagation of concrete composite containing fly ash and silica fume appears to become stronger and stronger with the increase of fiber volume fraction with the fiber volume fraction not beyond 0.12%.Keywords
This publication has 19 references indexed in Scilit:
- Study on mechanical properties and thermal stability of polypropylene/hemp fiber compositesJournal of Reinforced Plastics and Composites, 2010
- Utilization of fly ash with silica fume and properties of Portland cement–fly ash–silica fume concreteFuel, 2010
- Properties of fly ash concrete modified with hydrated lime and silica fumeConstruction and Building Materials, 2009
- Experimental Study on Shrinkage Properties of Cement-stabilized Macadam Reinforced with Polypropylene FiberJournal of Reinforced Plastics and Composites, 2009
- Combined effect of silica fume and steel fiber on the mechanical properties of high strength concretesConstruction and Building Materials, 2008
- The Influence of Hole Diameter on Residual Stresses and Plastic Zone Expansion in Steel Fiber-reinforced Aluminum Metal-matrix Laminated Composite Plates under Tranverse LoadingJournal of Reinforced Plastics and Composites, 2006
- Performance of Alkali-resistant Glass Fiber Reinforced ConcreteJournal of Reinforced Plastics and Composites, 2006
- Effect of Fly Ash Content on Impact, Compression, and Water Absorption Properties of Epoxy Toughened with Epoxy Phenol Cashew Nut Shell Liquid–Fly Ash CompositesJournal of Reinforced Plastics and Composites, 2006
- An Elastic-Plastic Stress Analysis of a Woven Reinforced Steel Fiber Thermoplastic Composite Cantilever Beam Subjected to Transverse Uniform Loads on the Upper SurfaceJournal of Reinforced Plastics and Composites, 2005
- Improving the Flexural Modulus and Thermal Stability of Pitch by the Addition of Silica FumeJournal of Reinforced Plastics and Composites, 2002