On the formation of large grain structure after friction stir processing of ultrafine-grained aluminium alloy
- 10 February 2023
- journal article
- research article
- Published by Taylor & Francis in Philosophical Magazine
- Vol. 103 (8) , 733-748
Abstract
A tendency for formation of large grain structure after friction stir processing (FSP) of ultrafine-grained aluminium produced by severe plastic deformation was thoroughly discussed. To do so, microstructural assessments using electron backscattered diffraction (EBSD) analysis at various regions, including ahead of and beneath the FSP tool were carried out. It was found that ultrafine-grained microstructure of the base metal played an important role in dynamic recrystallisation (DRX) occurring in the stir zone. There are some enlarged grains just ahead of the FSP tool prior to being stirred by it. Partial static recrystallisation followed by grain growth as well as strain-induced grain boundary migration was responsible for the formation of such grains. The large grains could postpone grain subdivision process through continuous and geometrical DRX mechanisms. Moreover, the remained part of the stored strain provided driving force for grain growth after grain subdivision in the stir zone.Keywords
This publication has 43 references indexed in Scilit:
- Nickel particle embedded aluminium matrix composite with high ductilityMaterials Letters, 2010
- Effect of initial grain size on the joint properties of friction stir welded aluminumMaterials Science and Engineering: A, 2009
- Microstructural evolution of cast Mg–Al–Zn during friction stir processing and subsequent agingActa Materialia, 2009
- Microstructural evolution ahead of the tool in aluminum friction stir weldsScripta Materialia, 2008
- CDRX modelling in friction stir welding of AA7075-T6 aluminum alloy: Analytical approachesJournal of Materials Processing Technology, 2007
- Flow stress anisotropy and Bauschinger effect in ultrafine grained copperActa Materialia, 2006
- Development of grain structure during friction stir weldingScripta Materialia, 2004
- Friction stir welding of ultrafine grained Al alloy 1100 produced by accumulative roll-bondingScripta Materialia, 2004
- A model of continuous dynamic recrystallizationActa Materialia, 2003
- Constrained groove pressing and its application to grain refinement of aluminumMaterials Science and Engineering: A, 2002