Y zeolite equilibrium catalyst waste from fluidized catalytic cracking regenerated by electrokinetic treatment: An adsorbent for sulphur and nitrogen compounds
Authors:
- Thamayne Valadares de OliveiraTOThamayne Valadares de Oliveira
- Renata Bachmann Guimarães ValtRVRenata Bachmann Guimarães Valt
- Haroldo de Araújo PonteHPHaroldo de Araújo Ponte
- Antônio Augusto Ulson de SouzaASAntônio Augusto Ulson de Souza
- Selene Maria de Arruda Guelli Ulson de SouzaSelene Maria de Arruda Guelli Ulson de Souza
- 30 April 2018
- journal article
- research article
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 96 (12) , 2593-2601
Abstract
The adsorption of sulphur, nitrogen, and aromatic compounds on a regenerated equilibrium catalyst (ecat‐R) was studied using model and real diesel fuels. The ecat‐R was obtained by electrokinetic treatment of an equilibrium catalyst (Y zeolites) waste from fluidized catalytic cracking (FCC) units. The studied model diesel fuel contained dibenzothiophene (1039 mg/L), quinoline (600 mg/L), and naphthalene (600 mg/L), as models for sulphur, nitrogen, and aromatic compounds, respectively, in n‐decane as solvent. The ecat‐R was characterized using X‐ray diffraction, X‐ray fluorescence, N2 adsorption‐desorption, thermogravimetric and differential thermal analysis, scanning electron microscopy, Fourier‐transform infrared spectroscopy, and granulometry. The adsorption experiments were performed at 40 °C and 150 rpm. The results of the isotherm and a chemical kinetics studies were favourable; the material showed a high adsorption capacity for dibenzothiophene (2.8 mg S/g) and quinoline (6.3 mg N/g). The isotherm for naphthalene was less favourable (2 mg NAP/g). The process rapidly reached equilibrium in approximately 2 h. For real diesel fuel, the adsorption removal was 26 % for sulphur and 36 % for nitrogen.Keywords
This publication has 34 references indexed in Scilit:
- Adsorptive desulfurization and denitrogenation using metal-organic frameworksJournal of Hazardous Materials, 2016
- Synthesis of ionic liquids and their use for extracting nitrogen compounds from gas oil feeds towards diesel fuel productionFuel Processing Technology, 2015
- Adsorptive denitrogenation of model fuel with CuCl-loaded metal–organic frameworks (MOFs)Chemical Engineering Journal, 2014
- A critical study on the adsorption of heterocyclic sulfur and nitrogen compounds by activated carbon: Equilibrium, kinetics and thermodynamicsChemical Engineering Journal, 2010
- Effect of the nitrogen heterocyclic compounds on hydrodesulfurization using in situ hydrogen and a dispersed Mo catalystCatalysis Today, 2010
- Ultra-deep desulfurization and denitrogenation of diesel fuel by selective adsorption over three different adsorbents: A study on adsorptive selectivity and mechanismCatalysis Today, 2006
- Science and technology of novel processes for deep desulfurization of oil refinery streams: a review⋆Fuel, 2003
- New design approaches to ultra-clean diesel fuels by deep desulfurization and deep dearomatizationApplied Catalysis B: Environment and Energy, 2003
- Desulfurization of Liquid Fuels by Adsorption via π Complexation with Cu(I)−Y and Ag−Y ZeolitesIndustrial & Engineering Chemistry Research, 2002
- Hydrodenitrogenation of quinoline over carbon-supported transition metal sulfidesJournal of Catalysis, 1991