An Artificial Magnetic Conductor-Backed Compact Wearable Antenna for Smart Watch IoT Applications
Open Access
- 24 November 2021
- journal article
- research article
- Published by MDPI AG in Electronics
- Vol. 10 (23) , 2908
Abstract
Smart watch antenna design is challenging due to the limited available area and the contact with the human body. The strap of smart watch can be utilized effectively for integration of the antenna. In this study, an antenna integrated on a smart watch strap model using computer simulation technology (CST) was designed. The antenna was designed for industrial, scientific, and medical (ISM) frequency bands at 2.45 and 5.8 GHz. Roger 3003C was used as substrate due to its semi-flexible nature. The antenna size is 28.81 × 19.22 × 1.58 mm3 and it has a gain of 1.03 and 5.97 dB, and efficiency of 80% and 95%, at 2.45 and 5.8 GHz, on the smart watch strap, respectively. A unit cell was designed having a dimension of 19.19 × 19.19 × 1.58 mm3 to mitigate the effect of back radiation and to enhance the gain. The antenna backed by the unit cell exhibited a gain of 2.44 and 6.17 dB with efficiency of 50% and 72% at 2.45 and 5.8 GHz, respectively. The AMC-backed antenna was integrated into a smart watch strap and placed on a human tissue model to study its human proximity effects. The specific absorption rate (SAR) values were calculated to be 0.19 and 1.18 W/kg at the designed ISM frequencies, and are well below the permissible limit set by the FCC and ICINPR. Because the antenna uses flexible material for wearable applications, bending analysis was also undertaken. The indicated results prove that bending along the x- and y-axes has a negligible effect on the antenna’s performance and the antenna showed excellent performance in the human proximity test. The measured results of the fabricated antenna were comparable with the simulated results. Thus, the designed antenna is compact, has high gain, and can be used effectively for wireless IoT applications.Keywords
This publication has 26 references indexed in Scilit:
- A Wearable Flexible antenna integrated on a Smart Watch for 5G ApplicationsJournal of Physics: Conference Series, 2020
- Electrically Compact SRR-Loaded Metamaterial Inspired Quad Band Antenna for Bluetooth/WiFi/WLAN/WiMAX SystemElectronics, 2019
- An Ultra-thin Triple-band Smartwatch Antenna with Support of Several Wireless Application Bands2019
- Recent Advances in Fabrication Methods for Flexible Antennas in Wearable Devices: State of the ArtSensors, 2019
- Miniaturized Printed Inverted-F Antenna for Internet of Things: A Design on PCB with a Meandering Line and Shorting StripInternational Journal of Antennas and Propagation, 2018
- Dual Band Metamaterial Antenna For LTE/Bluetooth/WiMAX SystemScientific Reports, 2018
- Printing technologies for the manufacturing of passive microwave components: antennasIET Microwaves, Antennas & Propagation, 2017
- A Cavity-Backed Annular Slot Antenna With High Efficiency for Smartwatches With Metallic HousingIEEE Transactions on Antennas and Propagation, 2017
- Built‐in antenna design for 2.4 GHz ISM band and GPS operations in a wrist‐worn wireless communication deviceIET Microwaves, Antennas & Propagation, 2016
- Integrated Metal-Frame Antenna for Smartwatch Wearable DeviceIEEE Transactions on Antennas and Propagation, 2015