Multi-objective optimization and comparison of surrogate models for separation performances of cyclone separator based on CFD, RSM, GMDH-neural network, back propagation-ANN and genetic algorithm
Open Access
- 9 December 2019
- journal article
- research article
- Published by Taylor & Francis in Engineering Applications of Computational Fluid Mechanics
- Vol. 14 (1) , 180-201
Abstract
Pressure drop (Δp) and collection efficiency (η) are used to evaluate the separation performance of the cyclone separator. In this study, we conducted comparative study of cyclone models using response surface methodology (RSM), back propagation neural network (BPNN), and group method of data handling (GMDH) networks to develop optimal predictive cyclone models. Also, we conducted multi-objective optimization for maximizing model and minimizing model using genetic algorithm (GA). CFD was performed instead of experimental method to get the estimated values for modeling of Δp and η. The validation results of CFD showed 0.5% and 2% errors for Δp and η, respectively, compared with the experimental data. Second, design of experiment (DOE) analysis for 10 cyclone geometrical parameters was executed to obtain the significant geometrical parameters. Vortex finder diameter Dx, inlet width a, inlet height b and cone height Hco have a significant effect on η and Δp. However, interaction effects between the geometrical parameters have small effects. The cyclone models by RSM, BPNN and GMDH based on 25 CFD training set were developed. The predictive performance results by the cyclone models were compared by 25 CFD test set. The GMDH method achieved the best prediction for Δp ( , RMSE = 0.102) , RMSE = 0.0119) than the RSM, BPNN cyclone models. Additionally, uncertainty analysis was performed to estimate the quantitative performance of cyclone models. The results show that the uncertainty width of GMDH models achieved the best prediction ( : ±0.0065, Δp: ±0.0188). Finally, GA was applied to optimize the GMDH models simultaneously. GA generated 70 non-dominant solutions. Reproducibility of five optimal points was validated by using CFD. The trade-off optimal point showed improvement by 24.31%, 18% and 8.79% for Δp and , respectively.
Keywords
This publication has 34 references indexed in Scilit:
- Computational intelligence approach for modeling hydrogen production: a reviewEngineering Applications of Computational Fluid Mechanics, 2018
- The effect of the cyclone length on the performance of Stairmand high-efficiency cyclonePowder Technology, 2015
- Effects of the gas outlet duct length and shape on the performance of cyclone separatorsSeparation and Purification Technology, 2015
- Assessment of evolutionary algorithms in predicting non-deposition sediment transportUrban Water Journal, 2015
- CFD modeling and multi-objective optimization of cyclone geometry using desirability function, artificial neural networks and genetic algorithmsApplied Mathematical Modelling, 2013
- Modeling and Pareto optimization of gas cyclone separator performance using RBF type artificial neural networks and genetic algorithmsPowder Technology, 2012
- The effect of cyclone inlet dimensions on the flow pattern and performanceApplied Mathematical Modelling, 2011
- 3-D computational fluid dynamics for gas and gas-particle flows in a cyclone with different inlet section anglesPowder Technology, 2006
- Theoretical investigation of pressure losses in cyclone separatorsInternational Communications in Heat and Mass Transfer, 2001
- Collection efficiency of cyclone separatorsAIChE Journal, 1981