Thermoplastic starch modified with polyurethane microparticles: Effects of hydrophilicity of polyurethane prepolymer
Authors:
- 9 January 2012
- journal article
- research article
- Published by Wiley in Starch - Stärke
- Vol. 64 (4) , 255-262
Abstract
It is important to chemically modify starch in an effective way. In this study, a series of polyurethane prepolymers (PUP) using 2,2‐dimethylol propionic acid (DMPA) as hydrophilic chain extender was synthesized and then used to modify starch by intensive mixing to obtain modified thermoplastic starch (TPS). The structure and properties of the modified TPS were investigated. The results showed that the elongation at break of the modified TPS increased from 5.4 to 9.8% with the content of PUP in modified TPS increasing from 10 to 20%, suggesting the PUP played an important role in the enhancement of the flexibility of the modified TPS sheet. The reaction ratio of PUP used for preparing the modified TPS was 98.5 ± 0.03%, indicating the modification was conducted efficiently because the multifunctional groups of polyurethane microparticles dramatically improved the reaction probability of the PUP modifier. The modified TPS prepared with PUP by adding DMPA showed increasing viscosity and decreasing contact angle due to the hydrophilicity of DMPA.Keywords
This publication has 23 references indexed in Scilit:
- Rheological behavior of waterborne polyurethane/starch aqueous dispersions during curePolymer, 2009
- Preparation and properties of plasticized starch modified with poly(ε-caprolactone) based waterborne polyurethaneCarbohydrate Polymers, 2008
- Understanding the Processing of Thermoplastic StarchMacromolecular Symposia, 2006
- Novel thermosets prepared by cationic copolymerization of various vegetable oils—synthesis and their structure–property relationshipsPolymer, 2005
- Innovative plasticized starch films modified with waterborne polyurethane from renewable resourcesCarbohydrate Polymers, 2005
- Thermoplastic starch/natural rubber blendsCarbohydrate Polymers, 2003
- Characteristics of polyurethanes incorporating starch granulesPolymer, 2002
- Biofibres, biodegradable polymers and biocomposites: An overviewMacromolecular Materials and Engineering, 2000
- Origins of B-type crystallinity in glycerol-plasticised, compression-moulded potato starchesCarbohydrate Polymers, 1999
- Influence of glycerol and water content on the structure and properties of extruded starch plastic sheets during agingJournal of Applied Polymer Science, 1997