How hard is fullerene-like CN x ? Some observations from the nanoindentation response of a magnetron-sputtered coating
Authors:
- 1 July 2002
- journal article
- research article
- Published by Taylor & Francis in Philosophical Magazine A
- Vol. 82 (10) , 2133-2147
Abstract
Thin fullerene-like CN x coatings deposited on hard substrates (e.g. SiC) show very shallow residual impressions when investigated by nanoindentation at displacements less than the coating thickness. The low work of indentation (i.e. the small area enclosed by the loading and unloading curves) of these materials implies a large amount of recovery of indent depth which is often associated with materials of high hardness. However, analysis of the unloading curves by the Oliver-Pharr method generates hardness values which are usually less than that of silicon. Detailed analysis of the loading curve shows three distinct regimes of behaviour corresponding to behaviour controlled by surface roughness, elastic deformation and plasticity. Measurements of Young's modulus from the elastic part of the loading curve, from the Oliver-Pharr method and from elastic wave measurements are all consistently low. This implies that the material behaves like a very hard rubber which undergoes considerable elastic recovery on unloading but does not have a very high resistance to penetration on loading. The very high H/E values for fullerene-like CN x confirms this view.Keywords
This publication has 18 references indexed in Scilit:
- Mechanical properties and characterisation of very thin CNx films synthesised by IBADDiamond and Related Materials, 2001
- Critical observations in the research of carbon nitrideMaterials Science and Engineering: A, 2001
- Hardness measurements on thin IBAD CNx films — a comparative studySurface and Coatings Technology, 2001
- Influence of plasma parameters on the growth and properties of magnetron sputtered CNx thin filmsJournal of Applied Physics, 2000
- Growth and characterisation of hard and elastic carbon nitride thin filmsSurface and Coatings Technology, 2000
- Deconvolution of hardness from data obtained from nanoindentation of rough surfacesJournal of Materials Research, 1999
- Relationships between hardness, elastic modulus, and the work of indentationApplied Physics Letters, 1998
- Analysis of nanoindentation load-displacement loading curvesJournal of Materials Research, 1996
- Hardness and Deformation Mechanisms of Highly Elastic Carbon Nitride Thin Films as Studied By NanoindentationMRS Proceedings, 1996
- Calculation of bulk moduli of diamond and zinc-blende solidsPhysical Review B, 1985