Application of Pseudomonas cepacia CCT 6659 Biosurfactant as a Metal Corrosion Inhibitor in a Constructed Accelerated Corrosion Chamber (ACC)
Authors:
- Rita de Cássia F. Soares da SilvaRSRita de Cássia F. Soares da Silva
- Alexandre Augusto P. Selva FilhoAFAlexandre Augusto P. Selva Filho
- Yslla Emanuelly S. FaccioliYFYslla Emanuelly S. Faccioli
- Yasmim K. SilvaYSYasmim K. Silva
- Kaio W. OliveiraKOKaio W. Oliveira
- Gleice Paula AraujoGAGleice Paula Araujo
- Nathália Maria P. Rocha e SilvaNSNathália Maria P. Rocha e Silva
- Attilio ConvertiAttilio Converti
- Leonie A. SarubboLeonie A. Sarubbo
Open Access
- 25 November 2024
- journal article
- research article
- Published by MDPI AG in Fermentation
- Vol. 10 (12) , 602
Abstract
Corrosion is the deterioration of metals due to environmental exposure. Commercial inhibitors used to control corrosion often contain heavy metal salts, which are highly toxic to both the environment and human health. A biosurfactant produced by the bacterium Pseudomonas cepacia CCT 6659 was tested as a corrosion inhibitor on carbon steel and galvanized iron surfaces. Matrices based on plant ingredients with different compositions were tested in a laboratory-constructed accelerated corrosion chamber (ACC) simulating a critical maritime atmosphere in conditions of 40 °C, 5% NaCl, and 100% humidity. The most stable matrix was selected for biosurfactant incorporation in different concentrations, expressed as critical micellar concentration (CMC), and was applied to metal surfaces to evaluate its ability to inhibit corrosion. Additionally, to evaluate the potential of the biosurfactant as a low-toxicity corrosion inhibitor additive in paint systems, iron and carbon steel samples were coated with three biosurfactant-containing commercial paints and subjected to critical atmospheric conditions for testing coating effectiveness. The formulation containing vegetable resin as a plasticizer, oleic acid, ethanol, and CaCO3 was chosen to incorporate the biosurfactant. The addition of the biosurfactant at twice its CMC led to a reduction in carbon steel sample mass loss from 123.6 to 82.2 g/m2, while in the galvanized iron plates, the mass loss decreased from 285.9 to 226.7 g/m2 at the same biosurfactant concentration. When supplemented with the biosurfactant, the alkyd resin-based paint (A) ensured less mass loss in samples (46.0 g/m2) compared to the control without biosurfactant (58.0 g/m2). Using the paint formulated with oil-based resin (B), the mass loss decreased from 53.0 to 24.1 g/m2, while with that based on petroleum derivatives (C), it decreased from 82.2 to 27.6 g/m2. These results confirm the feasibility of using biosurfactants in biodegradable coatings, reducing the need for commercial corrosion inhibitors.Keywords
Funding Information
- Brazilian fostering agencies Fundação de Amparo à Ciência do Estado de Pernambuco (FACEPE (State of Pernambuco Science Assistance Foundation)) (001)
- Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (001)
- Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq (National Council of Scientific and Technological Development)) (001)
This publication has 28 references indexed in Scilit:
- Equivalent relationship of accelerated corrosion based on the chloride ion diffusion property in calcium sulfoaluminate cement-based pastesInternational Communications in Heat and Mass Transfer, 2024
- Potential of biosurfactants in corrosion inhibition2024
- Study on the correlation between indoor accelerated corrosion testing of concrete epoxy polysiloxane coating and real-sea environmental testing in the East China SeaCase Studies in Construction Materials, 2024
- Surfactants as biodegradable sustainable inhibitors for corrosion control in diverse media and conditions: A comprehensive reviewScience of The Total Environment, 2023
- Application of Biosurfactants as Anti-Corrosive Agents2023
- Application of a biosurfactant from Pseudomonas cepacia CCT 6659 in bioremediation and metallic corrosion inhibition processesJournal of Biotechnology, 2022
- Utilization of biowaste as an eco-friendly biodegradable corrosion inhibitor for mild steel in 1 mol/L HCl solutionArabian Journal of Chemistry, 2020
- Theoretical and experimental studies of a new aniline derivative corrosion inhibitor for mild steel in acid mediumMaterials and Corrosion, 2019
- Production and characterization of a new biosurfactant from Pseudomonas cepacia grown in low-cost fermentative medium and its application in the oil industryBiocatalysis and Agricultural Biotechnology, 2017
- Antifouling paints based on marine natural products from Colombian CaribbeanInternational Biodeterioration & Biodegradation, 2013