Investigation into position deviation effect on micro newton force sensor
Authors:
Open Access
- 1 March 2020
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 799 (1)
Abstract
The position deviation effect on force sensor with a resolution of micro newton scale was investigated by theory model analysis and numerical simulation method. The finite element method and theoretical model were used to analyse the influence of the electrostatic micro force sensors when the electrode position of the cylindrical capacitor changed. Relationship between the sensor output micro force and the position deviation of the internal electrode in the cylindrical capacitance was obtained. It was found that different position deviation form had different degrees of influence on the sensor’s output result and the regions with little effect by position deviation were existed. For translation along Z-axis, the region was [-4 mm, 14 mm]. For translation along r-axis, the region was [-0.2 mm, 0.2 mm]. And for rotation around r-axis, the region was [-1°, 1°]. The corresponding maximum errors of the micro force output were 1.49%, 2.09% and 2.20%, respectively.Keywords
This publication has 12 references indexed in Scilit:
- Current state of the art in small mass and force metrology within the International System of UnitsMeasurement Science and Technology, 2018
- Upconverting Nanoparticles as Optical Sensors of Nano- to Micro-Newton ForcesNano Letters, 2017
- The measurement of Young’s modulus of thin films using secondary laser speckle patternsMeasurement, 2016
- Milligram mass metrology using an electrostatic force balanceMetrologia, 2016
- An overview of micro-force sensing techniquesSensors and Actuators A: Physical, 2015
- Report on the first international comparison of small force facilities: a pilot study at the micronewton levelMetrologia, 2011
- Atomic force microscope probe calibration by use of a commercial precision balanceMeasurement, 2007
- Recent advances in traceable nanoscale dimension and force metrology in the UKMeasurement Science and Technology, 2006
- Review of SI traceable force metrology for instrumented indentation and atomic force microscopyMeasurement Science and Technology, 2005
- Precision Measurement of the Casimir Force from 0.1 toPhysical Review Letters, 1998