Preparation of high-performance CGF/PVC laminates: optimization of compression molding process parameters

Authors:

Abstract
In this paper, CGF/PVC composite prepreg is prepared by dry powder impregnation process, and then, on this basis, the preparation of CGF/PVC laminates are further accomplished by compression molding. The optimum hot pressing process conditions for the preparation of CGF/PVC laminates by compression molding are determined through the continuous optimization of parameters such as temperature, pressure and time at the hot pressing stage by the one-factor-variable method. When the hot pressing temperature, hot pressing pressure and hot pressing time are 180 ℃, 7 MPa and 12 min, respectively, the tensile strength, flexural strength, interlaminar shear strength and notched impact toughness of CGF/PVC laminates prepared at this time are 252.65 MPa, 246.73 MPa, 25.38 MPa and 176.79 kJ/m2, respectively. This study not only provides a process optimization strategy for the preparation of CGF/PVC composites by compression molding, but also further provides important theoretical and practical guidance for the industrial production of high-performance CGF/PVC composites.

This publication has 31 references indexed in Scilit: