Use of Vanes for Control of Scour at Vertical Wall Abutments
Authors:
- 1 September 2001
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Hydraulic Engineering
- Vol. 127 (9) , 772-778
Abstract
Rock vanes are single-arm structures angled to the flow with a pitch into the streambed such that the tip of the vane is submerged even during low flow. Vanes have primarily been used in recent years for treatment of bank erosion in stream stability projects. These structures roll the water away from the eroding banks, thus limiting erosion of the channel banks. They have proven to be very effective treatments over a range of flow conditions. In this project, the effectiveness of vanes for preventing scour at single-span bridges with vertical wall abutments was evaluated based on laboratory experiments. The vanes were tested in small-scale experiments in a recirculating flume and subjected to a range of flow conditions, including bank full and a number of overbank flows, which were forced to return to the channel at the abutment. The results showed that the vanes were highly effective in moving the scour away from the abutment into the center of the channel under all flow conditions tested. Based on the e...Keywords
This publication has 5 references indexed in Scilit:
- Use of Sacrificial Piles as Pier Scour CountermeasuresJournal of Hydraulic Engineering, 1999
- Clear-Water Contraction Scour under Bridges in Pressure FlowJournal of Hydraulic Engineering, 1998
- Streambank Protection by Submerged VanesJournal of Hydraulic Engineering, 1987
- River‐Bend Bank Protection by Submerged VanesJournal of Hydraulic Engineering, 1983
- An Analysis of Relief Bridge ScourJournal of the Hydraulics Division, 1963