Multi-Objective Optimization of the Pre-Swirl System in a Twin-Web Turbine Disc Cavity
Open Access
Abstract
Enhancing thermal efficiency and minimizing weight are prevailing issues in aero engines. Owing to its hollow structure, the twin-web turbine disc exhibits remarkable weight reduction properties, while its enhanced cooling constitutes a novel challenge. In this study, a twin-web turbine disc cavity system is numerically investigated. To enhance the cooling effect and minimize pressure loss, a multi-objective genetic algorithm and Kriging surrogate model are employed to optimize the radial height of the pre-swirl nozzle and receiver hole in the disc cavity system. The results indicate that the overall performance of Opt-3, derived from the Technique for Order Preference by Similarity to the Ideal Solution method within the Pareto frontier, is superior. This configuration achieves a uniform low distribution of rotor temperatures while maintaining moderate pressure losses. Notably, the maximum temperature is reduced by 21.1 K compared to the basic model, with pressure losses remaining largely unchanged. Additionally, an increase in the flow ratio leads to a reduction in both the maximum temperature and average temperature of the back web while simultaneously increasing the temperature of the front web and augmenting pressure losses. However, it is important to note that the degree of variation in these parameters diminishes with increasing flow ratios.Keywords
Funding Information
- National Science and Technology Major Project (Y2022-III-0003-0012, J2019-Ⅲ-0023-0067)
This publication has 41 references indexed in Scilit:
- Neural network-based surrogate modeling and optimization of a multigeneration systemApplied Energy, 2024
- Effect of Impellers on the Cooling Performance of a Radial Pre-Swirl System in Gas Turbine EnginesAerospace, 2024
- Physics-informed neural networks (PINNs) for fluid mechanics: a reviewActa Mechanica Sinica, 2021
- An efficient strategy for reliability-based multidisciplinary design optimization of twin-web disk with non-probabilistic modelApplied Mathematical Modelling, 2020
- Multidisciplinary design optimization of twin-web turbine disk with pin fins in inner cavityApplied Thermal Engineering, 2019
- Numerical simulation and optimization of heat transfer enhancement in a heat exchanger tube fitted with vortex rod insertsApplied Thermal Engineering, 2017
- Multi-objective optimization of geometrical parameters of corrugated-undulated heat transfer surfacesApplied Energy, 2016
- Multidisciplinary design and multi-objective optimization on guide fins of twin-web disk using Kriging surrogate modelStructural and Multidisciplinary Optimization, 2016
- Multidisciplinary design and optimization of the twin-web turbine diskStructural and Multidisciplinary Optimization, 2015
- Efficiency enhancement of a gas turbine cycle using an optimized tubular recuperative heat exchangerEnergy, 2012