Foamed lignin–silicone bio-composites by extrusion and then compression molding
- 12 August 2015
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 17 (9) , 4647-4656
Abstract
The use of lignin, one of the most abundant natural products, has not gained wide use as a feedstock due to the difficulty of processing it. We have developed a simple route to produce lignin–silicone composite foams via first extrusion and then compression molding. The formulation consists of raw lignin particles, suitable mixtures of hydrosilanes, and a catalyst B(C6F5)3. In order to balance the reaction rates between extrusion and molding, as well as to find other optimized conditions for producing foamed structures, a series of optimizations established that a uniform, closed cell lignin–silicone foam was most effectively made by extrusion at room temperature followed by molding at elevated temperatures under pressure for up to 5 minutes. The morphology and uniformity of the foamed structure depended on many factors, including the quantity of lignin, the catalyst, the crosslinking silicone PHMS, the molecular weight of the spacer silicone H-PDMS-H, and the molding temperature. The content of lignin, acting as both a reinforcing filler and a crosslinker (chemically bonded to the siloxane network), could be varied over a wide range from 25 to 55%. The mechanical performance of the lignin–silicone foam was characterized using DMA and tensile tests (tensile strength up to 0.42 MPa, break-at-elongation up to 249%). The strength of the foam was improved by post-curing at 140 °C. Although the lignin–silicone foam loses some elasticity after post-curing, it maintains reasonable stability even after heating to 300 °C for 12 h. This processing method for lignin-based bio-composites provides new opportunities for better utilization of lignin in silicones and more broadly in organic materials.Keywords
This publication has 65 references indexed in Scilit:
- Effect of replacing polyol by organosolv and kraft lignin on the property and structure of rigid polyurethane foamBiotechnology for Biofuels, 2013
- Preparation of flexible, self‐extinguishing silicone foamsJournal of Applied Polymer Science, 2010
- Polysiloxane‐lignin compositesJournal of Applied Polymer Science, 2009
- Some of the properties of oriented strandboard manufactured using kraft lignin phenolic resinJournal of Materials Processing Technology, 2008
- Rheological properties of PDMS filled with CaCo3: The effect of filler particle size and concentrationJournal of Applied Polymer Science, 2006
- Effects of filler–polymer interactions on cold‐crystallization kinetics in crosslinked, silica‐filled polydimethylsiloxane/polydiphenylsiloxane copolymer meltsJournal of Polymer Science Part B: Polymer Physics, 2006
- Oxypropylation of Lignins and Preparation of Rigid Polyurethane Foams from the Ensuing PolyolsMacromolecular Materials and Engineering, 2005
- Starch‐derived glycol and glycerol glucosides prepared by reactive extrusion processingJournal of Applied Polymer Science, 1991
- Polyurethane‐based sealants modified by blending with Kraft ligninJournal of Applied Polymer Science, 1988
- Vanillin from Lignin MaterialsJournal of the American Chemical Society, 1942