Calculating far-field anisotropic stress from 3D seismic in the Permian Basin
- 1 February 2019
- journal article
- Published by Society of Exploration Geophysicists in The Leading Edge
- Vol. 38 (2) , 96-105
Abstract
Minimum horizontal stress (Sh) is the controlling parameter when hydraulic fracture stimulating tight oil formations but is next to impossible to measure quantitatively, especially in the far field and away from the wellbore. In-situ stress differences between bedding planes control fracture containment, which defines the complexity of fracture propagation and fracture geometry including orientation, height growth, width, and length. Geomechanical rock properties define elastic behavior, influencing how the subsurface will deform under induced stress. These properties include dynamic and static Young's modulus, Poisson's ratio, and Biot's coefficient. When combined with pore pressure and overburden stress, the elastic rock properties describe the mechanical earth model (MEM), which characterizes the geomechanical behavior of the subsurface. The MEM also defines key inputs for calculating Sh using the Ben Eaton stress equation, which has been commonly used by geoscientists for decades. However, calculated Sh from this simple model historically produces uncertain results when compared to field-measured stress due to an assumed homogeneous and isotropic subsurface. This is particularly contrary to tight oil formations that represent shale (or mudrock) reservoirs that are highly laminated and therefore anisotropic. Optimal parameterization of fracture geometry models for well spacing and engineered treatment design requires an anisotropic far-field in-situ stress measurement that accurately captures vertical and lateral variability of geomechanical properties in 3D space. A method is proposed herein that achieves this by using a modified version of the anisotropic Ben Eaton stress model. The method calculates minimum Sh by substitution of inverted 3D seismic volumes directly into the stress equation, replacing the bound Poisson's ratio term with an equivalent anisotropic corrected closure stress scalar (CSS) term. The CSS seismic volume is corrected for anisotropy using static triaxial core and is calibrated to multidomain data types including petrophysics, rock physics, geomechanics, and completion and reservoir engineering field measurements.Keywords
This publication has 7 references indexed in Scilit:
- Geophysical data processing, rock property inversion, and geomechanical model building in a Midland Basin development project, Midland/Ector counties, TexasThe Leading Edge, 2018
- Seismic Petrophysics in Quantitative Interpretation2016
- Integrated workflows for shale gas and case study results for the Horn River Basin, British Columbia, CanadaThe Leading Edge, 2012
- Seismic petrophysics and isotropic-anisotropic AVO methods for unconventional gas explorationThe Leading Edge, 2010
- The magic of LaméThe Leading Edge, 2010
- Elasticity of high-porosity sandstones; theory for two North Sea data setsGeophysics, 1996
- Influence of Geologic Discontinuities on Hydraulic Fracture Propagation (includes associated papers 17011 and 17074 )Journal of Petroleum Technology, 1987