Investigation of Inner Surface Groove Formation Under Radially Inward Pressure During Immersion Precipitation-Based Hollow Fiber Membrane Fabrication
Authors:
- 1 June 2011
- journal article
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 133 (3) , 031003
Abstract
Axially aligned grooves can be formed on the hollow fiber membrane (HFM) inner surface under some controlled fabrication conditions during a typical immersion precipitation-based phase inversion fabrication process. Such grooved HFMs are finding promising medical applications for nerve repair and regeneration. For better nerve regeneration performance, the HFM groove geometry should be carefully controlled. Towards this goal, in this study the polyacrylonitrile (PAN) HFM groove number has been modeled based on the radially inward pressure-induced buckling mechanism. HFM has been modeled as a long six-layer fiber membrane, and the HFM inner skin layer has been treated as a thin-walled elastic cylindrical shell under the shrinkage-induced inward radial pressure. The groove number has been reasonably estimated based on the resulting buckling mode as compared with the experimental measurements.Keywords
This publication has 25 references indexed in Scilit:
- Groove Formation Modeling in Fabricating Hollow Fiber Membrane for Nerve RegenerationJournal of Applied Mechanics, 2010
- Formation of Highly Aligned Grooves on Inner Surface of Semipermeable Hollow Fiber Membrane for Directional Axonal OutgrowthJournal of Manufacturing Science and Engineering, 2008
- Tissue-engineering approaches for axonal guidanceBrain Research Reviews, 2005
- Buckling of Long Sandwich Cylindrical Shells Under External PressureJournal of Applied Mechanics, 2004
- Mechanical Properties of Asymmetric Polysulfone Membranes Containing Surfactant as AdditivesIndustrial & Engineering Chemistry Research, 2001
- Elasticity Solutions for Sandwich Orthotropic Cylindrical Shells Under External/Internal Pressure or Axial ForceAIAA Journal, 2001
- Spinning process variables and polymer solution effects in the die-swell phenomenon during hollow fiber membranes formationBrazilian Journal of Chemical Engineering, 2000
- Microfabrication in Biology and MedicineAnnual Review of Biomedical Engineering, 1999
- Neurite Outgrowth and Growth Cone Morphology on Micropatterned SurfacesBiotechnology Progress, 1998
- Polysulfone hollow fibers. I. Spinning and propertiesJournal of Applied Polymer Science, 1976