Analysis of Silver Release from Furnace-Tested TRISO Particles
Open Access
- 1 September 2025
- report
- Published by Office of Scientific and Technical Information (OSTI)
Abstract
High temperature testing of intact TRISO particles previously irradiated in AGR-1 experiments was performed. Higher levels of Ag release were found at 1300 C compared to both lower and higher temperatures. Additionally, some of the particles released a majority of their inventory while others did not appear to release radioactivity under similar irradiation and testing conditions. An analysis of the Ag release data from furnace for irradiated TRISO testing was performed. A few possibilities for the Ag diffusion behavior are presented in this work including impurities in the SiC, and the Si to C atom ratio near grain boundaries. The diffusion of Eu from TRISO particles was also considered. The hypothesis for this behavior is variability in the formation of Eu oxides and carbides depending on kernel chemistry.Keywords
Funding Information
- USDOE Office of Nuclear Energy (NE), Nuclear Fuel Cycle and Supply Chain. Advanced Fuel Campaign (AC05-00OR22725)
This publication has 16 references indexed in Scilit:
- Microstructure of irradiated AGR TRISO particle buffer layers as measured by X-ray computed tomographyJournal of Nuclear Materials, 2022
- Fission product distribution in irradiated safety-tested and as-irradiated AGR-2 TRISO particlesJournal of Nuclear Materials, 2022
- Modeling fission product diffusion in TRISO fuel particles with BISONJournal of Nuclear Materials, 2021
- Grain-boundary type and distribution in silicon carbide coatings and wafersJournal of Nuclear Materials, 2018
- Performance of AGR-1 high-temperature reactor fuel during post-irradiation heating testsNuclear Engineering and Design, 2016
- Comparison of fission product release predictions using PARFUME with results from the AGR-1 safety testsNuclear Engineering and Design, 2016
- Fabrication and characterization of driver-fuel particles, designed-to-fail fuel particles, and fuel compacts for the US AGR-3/4 irradiation testNuclear Engineering and Design, 2014
- libMesh : a C++ library for parallel adaptive mesh refinement/coarsening simulationsEngineering with Computers, 2006
- Diffusion coefficients of fission products in the UO2 kernel and pyrocarbon layer of BISO-coated fuel particles at extremely high temperaturesJournal of Nuclear Materials, 1990
- Fission-product release during postirradiation annealing of several types of coated fuel particlesJournal of Nuclear Materials, 1984