Effects of hybrid metal oxide nanoparticles on the tribological and emission attributes of algae‐derived biofuel in compression ignition engines
Open Access
- 10 October 2026
- journal article
- Published by Wiley in Environmental Progress & Sustainable Energy
Abstract
The growing demand for sustainable fuels has accelerated the development of algae‐derived biodiesel for compression‐ignition engines. In this study, Chlorella vulgaris methyl ester (AME) exhibited physicochemical properties comparable to diesel and satisfied ASTM D6751 fuel quality requirements, making it suitable for blending. The effects of hybrid nanoparticles on the combustion, performance, and emission characteristics of an AME20 blend were experimentally investigated in a single‐cylinder diesel engine operating at 1500 rpm under different loads. Four test fuels, namely diesel, AME20, AME20 + 50 ppm (TiO 2 + SiO 2 ), and AME20 + 100 ppm (TiO 2 + SiO 2 ), were evaluated. Compared with AME20, the AME20 + 100 ppm (TiO 2 + SiO 2 ) blend increased peak cylinder pressure and heat release rate by 5.1% and 21.48%, respectively. Brake thermal efficiency (BTE) improved by 3.64%, while brake‐specific fuel consumption (BSFC) decreased by 12.64%. Carbon monoxide (CO), unburned hydrocarbon (HC), and smoke emissions were reduced by 21.3%, 23.6%, and 6.31%, respectively, whereas NO X showed a slight increase due to higher combustion temperatures. Tribological analysis demonstrated reductions of 14.88% in wear scar diameter (WSD) and 12.35% in coefficient of friction (COF), with SEM observations confirming the formation of a protective tribo‐film. Overall, AME20 + 100 ppm (TiO 2 + SiO 2 ) effectively enhanced the combustion, emission, and lubrication performance of AME20, demonstrating its potential as a sustainable diesel fuel.Keywords
This publication has 54 references indexed in Scilit:
- Impact of graphene oxide nanoparticles on performance, combustion, emissions, and tribological characteristics of SAME20 algae biodieselEnvironmental Science and Pollution Research, 2026
- Exploiting Microalgae Biorefineries for Low‐Carbon Strategies in Sustainable Algae‐Green BuildingsChemBioEng Reviews, 2026
- Performance and emission improvements of diesel engine run on biodiesel with green synthesized copper oxide nanoparticlesEnvironmental Progress & Sustainable Energy, 2026
- Enhancement of CI Engine Performance and Emission Characteristics Using SiO₂ Nanoparticle-Enriched Biofuel Derived from Waste Paint and Prosopis JulifloraSilicon, 2025
- Synthesis, performance, emissions, and tribological Investigation of waste coconut cooking oil–based biodieselEnvironmental Science and Pollution Research, 2025
- Opportunities to improve the lubrication, fuel efficiency, and emission reduction using nanotechnologies: a reviewJournal of Thermal Analysis and Calorimetry, 2025
- A Short Review on Nano-Additives to Enhance Biodiesel Performance in Diesel EnginesJournal of Thermal Science, 2025
- Performance and Emission Characteristics of Bombyx mori Biodiesel Blends With SiO2 Nanoadditive in DI‐CI EnginesHeat Transfer, 2025
- Experimental study of diesel engine performance and emissions from microalgae fuel blends with SiO2 nanoadditives: RSM and Taguchi optimizationEnvironmental Science and Pollution Research, 2024
- Machine Learning-Based Assessment of the Influence of Nanoparticles on Biodiesel Engine Performance and Emissions: A critical reviewArchives of Computational Methods in Engineering, 2024