Application of MR element to clamp-on type current meter.
Authors:
- M. MatsumotoMMM. Matsumoto
- T. HaeiwaTHT. Haeiwa
- H. InoueHIH. Inoue
- S. TanakaSTS. Tanaka
Open Access
- 1 January 1991
- journal article
- Published by The Magnetics Society of Japan in Journal of the Magnetics Society of Japan
- Vol. 15 (2) , 461-464
Abstract
A new clamp-on type current meter with magnetoresistive (MR) element has been built which has the sensitivity of sub-milli ampere order and wide frequency bandwidth. The sensor element is a 1000∼1500Å thick, 0.2 mm wide, 15 mm long, evaporated thin film of 80/20 NiFe with 2.5% magnetoresistivity. The MR element is installed in the 0.2 mm gap of ferrite core which has a 188-turn coil to provide dc bias field (4 Oe) for linear sensitivity and to be used for feedback detection. In non-feedback mode, system noise level (sensor+circuit) is 0.8 mV which is equivalent to 0.2 mA current. In feedback mode, this current meter maintains a linear sensitivity throughout 0.4A in the frequency range of DC∼10 kHz. The temperature stability is improved by compensating with double elements.Keywords
This publication has 3 references indexed in Scilit:
- Development of the absolute type magnetic encoder suitable for thinner structure.Journal of the Magnetics Society of Japan, 1989
- Magnetoresistive thin-film sensor with permanent magnet biasing filmJournal of Applied Physics, 1985
- The performance of magnetoresisitive vector magnetometers with optimised conductor and anisotropy axis anglesIEEE Transactions on Magnetics, 1983