Magnetic graphene oxide for methylene blue removal: adsorption performance and comparison of regeneration methods
- 7 January 2022
- journal article
- research article
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 29 (20) , 30774-30789
Abstract
A series of Fe3O4-graphene oxide (GO) composite materials (MGOs) with abundant surface area, rich oxygen-containing functional groups, and magnetic properties were prepared in a facile coprecipitation method and then employed for the adsorptive removal of methylene blue (MB) from water. The kinetic data were better fitted in the pseudo-second-order model than in the pseudo-first-order model, and the intraparticle diffusion model revealed the two-step diffusion process including diffusion in the boundary layer and in the porous structures. The maximum adsorption amounts of MB were calculated to be 37.5–108 mg/g at 25 °C and pH 9 using the Langmuir isotherm model. Thermodynamic study showed that the adsorption process was spontaneous, with ΔH° of 23.0–49.6 kJ/mol and ΔS° of 131–249 J∙mol−1∙K−1. The adsorption amount of MB increased with pH in the range of 4–10. Inorganic ions including Na+ and Ca2+ suppressed the adsorption of MB, and the more pronounced impact of Ca2+ was ascribed to its higher valence state. The cetyltrimethylammonium bromide (CTAB) surfactant showed a stronger inhibitory effect than Ca2+. The adsorption mechanism was proposed to be a combination of electrostatic interactions, hydrophobic adsorption, and electron donor–acceptor interactions. Two methods were used for the regeneration of spent MGO, and the results showed that the peroxomonosulfate (PMS) oxidation method was more favorable than the acid washing method, considering the better regeneration ability and lower amount of washing water used. Finally, the reaction mechanism of PMS oxidation was analyzed based on quenching tests and in situ open circuit potential measurements, which proved that OH and 1O2 played dominant roles and that the fine adsorption ability of MGO promoted the reaction between them and MB.Keywords
This publication has 87 references indexed in Scilit:
- Persulfate oxidation regeneration of granular activated carbon: Reversible impacts on sorption behaviorChemosphere, 2012
- The GO/rGO–Fe3O4 composites with good water-dispersibility and fast magnetic response for effective immobilization and enrichment of biomoleculesJournal of Materials Chemistry, 2012
- Graphene oxide-iron oxide and reduced graphene oxide-iron oxide hybrid materials for the removal of organic and inorganic pollutantsRSC Advances, 2012
- “Lest we forget you — methylene blue …”Neurobiology of Aging, 2011
- Chemical regeneration of activated carbon used for dye adsorptionJournal of the Taiwan Institute of Chemical Engineers, 2011
- Adsorption of methylene blue on low-cost adsorbents: A reviewJournal of Hazardous Materials, 2010
- Equilibrium, thermodynamics and process design to minimize adsorbent amount for the adsorption of acid dyes onto cationic polymer-loaded bentoniteChemical Engineering Journal, 2010
- Adsorption of dyes and phenol from water on resin adsorbents: Effect of adsorbate size and pore size distributionJournal of Hazardous Materials, 2006
- Substituent effects on the electronic structure and pKa of benzoic acidInternational Journal of Quantum Chemistry, 2002
- Substituent effects on the physical properties and pKa of phenolInternational Journal of Quantum Chemistry, 2001