Seismic Behaviors of RC Frame Beam-Column Joints under Acid Rain Circle: A Pilot Experimental Study
Authors:
- 1 March 2017
- journal article
- research article
- Published by Taylor & Francis in Journal of Earthquake Engineering
- Vol. 22 (6) , 1008-1026
Abstract
This research was carried out to investigate the seismic performance of RC beam-column joints under acid rain circle via comparison of energy dissipation behavior and failure mechanism of joints with different corrosion levels and axial compression ratio. At the initial corrosion level, the strength, ductility, and energy consumption of RC beam-column joints improved slightly; at a later stage, the bearing and deformation capacity decreased as the corrosion rate of steel rebars increased. The test shows that with the increasing of the axial compression ratio, the initial stiffness and ultimate bearing capacity of the joints will increasing if the corrosion levels are the same, but the ductility of that will decrease.Keywords
Funding Information
- Supported by Science Foundation of Shaanxi province of China (2011KTCQ03-05)
- Supported by Science Foundation of Shaanxi province of China (2012K12-03-01)
- Supported by Science Foundation of Shaanxi province of China (2013JC16)
- National Key Technology R&D Program (2013BAJ08B03)
- Natural Science Foundation of China (50978218)
- Natural Science Foundation of China (51108376)
- Research Fund for the Doctoral Program of Higher Education of China (20136120110003)
This publication has 26 references indexed in Scilit:
- Lifetime seismic performance of concrete bridges exposed to corrosionStructure and Infrastructure Engineering, 2013
- Long-term seismic performance of RC structures in an aggressive environment: emphasis on bridge piersStructure and Infrastructure Engineering, 2013
- Cyclic Tests on External RC Beam-Column Joints: Role of Seismic Design Level and Axial Load Value on the Ultimate CapacityJournal of Earthquake Engineering, 2012
- Life‐cycle reliability of RC bridge piers under seismic and airborne chloride hazardsEarthquake Engineering & Structural Dynamics, 2011
- Simplified estimation of seismic risk for reinforced concrete buildings with consideration of corrosion over timeBulletin of Earthquake Engineering, 2011
- A practical method for calculating the corrosion rate of uniformly depassivated reinforcing bars in concreteMaterials and Corrosion, 2007
- Theoretical considerations on the supposed linear relationship between concrete resistivity and corrosion rate of steel reinforcementMaterials and Corrosion, 2005
- Investigation of the effects of acid rain on the deterioration of cement concrete using accelerated tests established in laboratoryAtmospheric Environment, 2004
- Bond characteristics of corrding reinforcement in concrete beamsMaterials and Structures, 1999
- The bond stress between a reinforcement bar and concrete: is it theoretically predictable?Materials and Structures, 1988