Energy-efficient shipboard CO2 capture via an aqueous ammonia/[C4 mim][PF6 ] blend absorbent: modeling and system integration
Authors:
- Shenao LiSLShenao Li
- Jingjie HeJHJingjie He
- Xiaoxuan MuXMXiaoxuan Mu
- Lan XiaLXLan Xia
- He MiaoHe Miao
- Chunfei ZhangCZChunfei Zhang
- Jinliang YuanJinliang Yuan
- Fu WangFWFu Wang
Preprint
- 22 April 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
In response to increasingly stringent emission reduction requirements in international shipping, this study proposes an improved onboard carbon capture system using an aqueous ammonia/ionic liquid ([C4mim][PF6]) blend absorbent to address the large equipment size and high regeneration energy of conventional ammonia-based processes. Property and thermodynamic models for the hybrid system were developed in Aspen Plus based on literature data, and the capture process was rigorously simulated and experimentally validated using a rate-based non-equilibrium stage model. The results show that adding 20% [C4mim][PF6] reduces absorber packing height by 29%-42% through enhanced physical solubility and mass-transfer performance, while decreasing regeneration energy by 6.3% to 2.81 MJ/kg CO2. Parametric optimization identified optimal operating conditions, including a lean solution temperature of 10 ℃, a CO2 loading of 0.31, an NH3 concentration of 6%, and a regeneration pressure of 10 bar, enabling a 90% CO2 capture rate with low energy demand. Energy integration analysis indicates that flue gas waste heat alone supports a 75% capture rate but causes power shortages, whereas supplemental gas turbine integration increases the capture rate to 90%, while reducing overall system energy efficiency from 50.3% to 40.14%.Keywords
This publication has 38 references indexed in Scilit:
- Techno-economic analysis of carbon dioxide capture from low concentration sources using membranesChemical Engineering Journal, 2023
- An advanced, ammonia-based combined NOx/SOx/CO2 emission control process towards a low-cost, clean coal technologyApplied Energy, 2020
- Development of carbon-based vacuum, temperature and concentration swing adsorption post-combustion CO2 capture processesChemical Engineering Journal, 2019
- Current status and challenges of the ammonia escape inhibition technologies in ammonia-based CO2 capture processApplied Energy, 2018
- Efficiency evaluation of a coal-fired power plant integrated with chilled ammonia process using an absorption refrigeratorApplied Energy, 2018
- Study of solvent-based carbon capture for cargo ships through process modelling and simulationApplied Energy, 2017
- Rate based modeling of absorption and regeneration for CO2 capture by aqueous ammonia solutionApplied Energy, 2013
- A new fragment contribution‐corresponding states method for physicochemical properties prediction of ionic liquidsAIChE Journal, 2012
- Promoted CO2 absorption in aqueous ammoniaGreenhouse Gases: Science and Technology, 2012
- Carbon dioxide capture by absorption, challenges and possibilitiesChemical Engineering Journal, 2011