The Influence of Thermomechanical Conditions on the Hot Ductility of Continuously Cast Microalloyed Steels
Open Access
- 16 September 2024
- Vol. 17 (18) , 4551
Abstract
Continuous casting is the most common method for producing steel into semi-finished shapes like billets or slabs. Throughout this process, steel experiences mechanical and thermal stresses, which influence its mechanical properties. During continuous casting, decreased formability in steel components leads to crack formation and failure. One reason for this phenomenon is the appearance of the soft ferrite phase during cooling. However, it is unclear under which conditions this ferrite is detrimental to the formability. In the present research, we investigated what microstructural changes decrease the formability of microalloyed steels during continuous casting. We studied the hot compression behaviour of microalloyed steel over temperatures ranging from 650 °C to 1100 °C and strain rates of 0.1 to 0.001 using a Gleeble 3800® (Dynamic Systems Inc, Poestenkill, NY, USA) device. We examined microstructural changes at various deformation conditions using microscopy. Furthermore, we implemented a physically-based model to describe the deformation of austenite and ferrite. The model describes the work hardening and dynamic restoration mechanisms, i.e., discontinuous dynamic recrystallisation in austenite and dynamic recovery in ferrite and austenite. The model considers the stress, strain, and strain rate distribution between phases by describing the dynamic phase transformation during the deformation in iso-work conditions. Increasing the strain rate below the transformation temperature improves hot ductility by reducing dynamic recovery and strain concentration in ferrite. Due to limited grain boundary sliding, the hot ductility improves at lower temperatures (<750 °C). In the single-phase domain, dynamic recrystallisation improves the hot ductility provided that fracture occurs at strains in which dynamic recrystallisation advances. However, at very low strain rates, the ductility decreases due to prolonged time for grain boundary sliding and crack propagation.
Keywords
All Related Versions
This publication has 28 references indexed in Scilit:
- Effect of Strain Rate on the Hot Ductility Behavior of a Continuously Cast Ti–Nb Microalloyed SteelSteel Research International, 2020
- Influence of Thermal History on the Hot Ductility of a Continuously Cast Low Alloyed Cr-Mo SteelJournal of Materials Engineering and Performance, 2018
- A review of dynamic recrystallization phenomena in metallic materialsMaterials & Design, 2016
- Continuous Casting of Steel2014
- Influence of Strain Rate on Hot Ductility of a V‐Microalloyed Steel SlabSteel Research International, 2012
- Hot Deformation Behaviour of Low Alloy SteelSteel Research International, 2011
- Prediction of the critical conditions for initiation of dynamic recrystallizationMaterials & Design (1980-2015), 2010
- A model for the hot deformation of low-carbon steelJournal of Materials Processing Technology, 1996
- Kinetics of flow and strain-hardeningActa Metallurgica, 1981
- Crack formation in the continuous casting of steelMetallurgical Transactions B, 1977