Toughening of polyamide 6 with a maleic anhydride functionalized acrylonitrile–butadiene–styrene copolymer
Authors:
- 9 May 2008
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 109 (4) , 2482-2490
Abstract
Maleic anhydride functionalized acrylonitrile–butadiene–styrene (ABS‐g‐MA) copolymers were prepared via an emulsion polymerization process. The ABS‐g‐MA copolymers were used to toughen polyamide 6 (PA‐6). Fourier transform infrared results show that the maleic anhydride (MA) grafted onto the polybutadiene phase of acrylonitrile–butadiene–styrene (ABS). Rheological testing identified chemical reactions between PA‐6 and ABS‐g‐MA. Transmission electron microscopy and scanning electron microscopy displayed the compatibilization reactions between MA of ABS‐g‐MA and the amine and/or amide groups of PA‐6 chain ends, which improved the disperse morphology of the ABS‐g‐MA copolymers in the PA‐6 matrix. The blends compatibilized with ABS‐g‐MA exhibited notched impact strengths of more than 900 J/m. A 1 wt % concentration of MA in ABS‐g‐MA appeared sufficient to improve the impact properties and decreased the brittle–ductile transition temperature from 50 to 10°C. Scanning electron microscopy results show that the shear yielding of the PA‐6 matrix was the major toughening mechanism. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008Keywords
This publication has 29 references indexed in Scilit:
- Properties of compatibilized nylon 6/ABS blendsPolymer, 2000
- Nylon-6/rubber blends: 6. Notched tensile impact testing of nylon-6/(ethylene-propylene rubber) blendsPolymer, 1994
- Nylon 6-rubber blends: 9. Crack initiation and propagation under impact conditionsPolymer, 1993
- Modification and compatibilization of nylon 6 with functionalized styrenic block copolymersPolymer Engineering & Science, 1993
- Reactive coupling of core-shell impact modifiers to polyamide matrices using styrene-maleic anhydride copolymersPolymer, 1993
- Morphology of Nylon‐6 blends with styrenic polymersJournal of Polymer Science Part B: Polymer Physics, 1992
- Rubber toughening of polyamides with functionalized block copolymers: 2. Nylon-6,6Polymer, 1992
- Rubber toughening of polyamides with functionalized block copolymers: 1. Nylon-6Polymer, 1992
- Impact behaviour of nylon-rubber blends: 4. Effect of the coupling agent, maleic anhydridePolymer, 1989
- Brittle-tough transition in nylon-rubber blends: effect of rubber concentration and particle sizePolymer, 1987