Application of Electric Resistance Change Method to Damage Detection of CFRP Bolted Joints
Authors:
- 15 November 2005
- journal article
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 297-300, 653-658
Abstract
Bolted joints are widely used for composite structures. As is well known, excessive bearing load gives rise to bearing failure at hole boundaries. Detecting bearing failure is important for assuring integrity of composite structures. Conventional nondestructive inspection methods are expensive, cumbersome, time-consuming, and not suitable for health monitoring, and a simple, low-cost inspection method for bearing failure must be developed. Authors have experimentally demonstrated detection bearing failure by an electrical resistance change method. In this study, detectablity of remote damage, which includes bearing failure, using an electric resistance change method is investigated analytically. The results show that fiber breaking and delamination induce permanent increase in the electric resistance of the bolted composite joints, and that the proposed method, which involves measuring electric resistance, is effective for detecting bearing failure.Keywords
This publication has 25 references indexed in Scilit:
- Stress analysis and strength prediction of mechanically fastened joints in FRP: a reviewComposites Part A: Applied Science and Manufacturing, 1997
- Electrical resistance measurement technique for detecting failure in CFRP materials at high strain ratesComposites Science and Technology, 1994
- Carbon fiber reinforced concrete for smart structures capable of non-destructive flaw detectionSmart Materials and Structures, 1993
- Electrical crack length measurement and the temperature dependence of the Mode I fracture toughness of carbon fibre reinforced plasticsComposites Science and Technology, 1993
- Load and failure analyses of CFRP laminates by means of electrical resistivity measurementsComposites Science and Technology, 1989
- The strength of bolted joints in glass fibre/epoxy laminatesComposites, 1985
- The electrical properties of joints in carbon fibre compositesComposites, 1982
- On the bearing strengths of cfrp laminatesComposites, 1982
- The Effect of Stacking Sequence on the Pin-Bearing Strength in Glass Fibre Reinforced PlasticJournal of Composite Materials, 1977
- The strength of bolted joints in multi-directional cfrp laminatesComposites, 1977