Achieving fabrication of highly transparent Y 2 O 3 ceramics via air pre‐sintering by deionization treatment of suspension
- 28 December 2020
- journal article
- research article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 104 (6) , 2689-2701
Abstract
An easy albeit quite effective deionization suspension treatment was adopted to alleviate the detrimental effects related to the hydrolysis of Y 2 O 3 in an aqueous medium. Fabrication of highly transparent Y 2 O 3 ceramics with a fine grain size via air pre‐sintering and post–hot isostatic pressing (HIP) treatment without using any sintering additive was achieved using the treated suspensions. The hydrolysis issue of Y 2 O 3 powder in an aqueous medium was effectively alleviated by using deionization treatment, and a well‐dispersed suspension with a low concentration of dissolved Y 3+ species was obtained. The dispersed suspensions were consolidated by the centrifugal casting method, and the green bodies derived from the suspension of 35.0 vol% solid loading showed an improved homogeneity with a relative density of 52.1%. Fully dense Y 2 O 3 transparent ceramic with high transparency was obtained by pre‐sintering consolidated green compacts at a low temperature of 1400°C for 16 h in air followed by a post‐HIP treatment at 1550°C for 2 h under 200 MPa pressure. The sample had a fine average grain size of 690 nm. The in‐line transmittance of the sample reached 83.3% and 81.8% at 1100 nm and 800 nm, respectively, very close to the theoretical values of Y 2 O 3 .Keywords
Funding Information
- Natural Science Foundation of Liaoning Province (2020‐KF‐14‐05)
This publication has 49 references indexed in Scilit:
- Fabrication of Y2O3 transparent ceramics by hot isostatic pressing from precipitated nanopowdersOptical Materials, 2019
- Ammonium sulfate and PEG composite surfactant to promote dispersibility of precursors and Y2O3 powders for transparent ceramicsCeramics International, 2018
- Stirring speed assisted homogenization of precipitation reaction for enhanced optical performance of Y2O3 transparent ceramicsCeramics International, 2018
- Nanostructured Y2O3 ceramics elaborated by Spark Plasma Sintering of nanopowder synthesized by PEG assisted combustion method: The influence of precursor morphological characteristicsCeramics International, 2017
- Highly transparent Yb-doped (LaxY1−x)2O3 ceramics prepared through colloidal methods of nanoparticles compactionJournal of the European Ceramic Society, 2016
- A novel spray co-precipitation method to prepare nanocrystalline Y2O3 powders for transparent ceramicsJournal of Materials Science: Materials in Electronics, 2016
- Microwave-assisted hydrothermal synthesis of Eu2O3-coated spherical Y2O3 ceramic particlesCeramics International, 2016
- Synthesis and characterization of Y2O3 nanoparticles by sol–gel process for transparent ceramics applicationsJournal of Sol-Gel Science and Technology, 2016
- Comparison between slip-casting and uniaxial pressing for the fabrication of translucent yttria ceramicsJournal of Materials Science, 2008
- Control of high solid content yttria slurry with low viscosity for gelcastingJournal of Alloys and Compounds, 2006