Topology optimization method and lightweight design of anthropomorphic manipulator
Authors:
Open Access
- 1 January 2020
- conference paper
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1453 (1)
Abstract
The topology optimization method is adopted to realize the weight reduction of the mechanical arm under the rigidity condition. The typical configuration and load conditions of the manipulator are analyzed. The stiffness mass model of the part is established by the finite element analysis method, and the topology optimization of the part is carried out. On this basis, the optimization of the manipulator system is completed. The optimized art quality is reduced by 6.2% compared with the original model, and the stiffness meets the standard requirements. The method of combining virtual joint method with working space of the manipulator is proposed. The amount of end deformation after optimization of the manipulator is analyzed. The maximum deformation is 0.27mm, which meets the requirements. The optimization process provides a reference for the selection of the drive joint parts of the mechanical arm. According to this, the physical design of the mechanical arm is completed and the load test is carried out. The experiment shows that the mechanical arm can still achieve rapid response under the condition of a 2kg end load.Keywords
This publication has 9 references indexed in Scilit:
- Optimal design of lightweight serial robots by integrating topology optimization and parametric system optimizationMechanism and Machine Theory, 2019
- Graded-density Lattice Structure Optimization Design Based on Topology OptimizationJournal of Mechanical Engineering, 2019
- Solving Topology Optimization Problems Based on RAMP Method Combined with Guide-weight MethodJournal of Mechanical Engineering, 2012
- High performance automotive chassis design: a topology optimization based approachStructural and Multidisciplinary Optimization, 2010
- A level set method for structural topology optimization and its applicationsAdvances in Engineering Software, 2004
- Optimal topology design using linear programmingComputers & Structures, 1994
- A simple evolutionary procedure for structural optimizationComputers & Structures, 1993
- Preprocessing and postprocessing for materials based on the homogenization method with adaptive finite element methodsComputer Methods in Applied Mechanics and Engineering, 1990
- Generating optimal topologies in structural design using a homogenization methodComputer Methods in Applied Mechanics and Engineering, 1988