Experimental study on the mechanical properties of three‐dimensional braided composite circular tubes with preembedded licker‐in
Authors:
- 3 July 2023
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 44 (9) , 5433-5449
Abstract
This study investigates the tensile and compression properties of three‐dimensional five‐direction (3D5D) braided composite circular tubes with preembedded titanium alloy licker‐ins. The influence of the braided angle, braided thickness, and braided configuration on the bearing capacity is analyzed, and the microdamage morphology and failure mechanism of the tube structure are examined using scanning electron microscopy. Results show that the 3D5D braided tube has a larger tensile failure load than the 3D full five‐direction braided tube of the same outer diameter. In circular tubes of the same braided configuration and outer diameter, the compression failure load increases with the wall thickness, and the C‐ø30t3 circular tube achieves the maximum compression failure load. The damage morphology is characterized by the pulling‐off failure of the licker‐in joint. The T‐ø30t2.5 and T‐ø25t3 circular tubes achieve a large failure load, with an average tensile load of over 120 kN. The failure morphology is characterized by the cracking of the fiber at the end of the tube after the licker‐in joint has been pulled off. The average tensile failure load of the T‐ø30t3 circular tubes is over 105 kN, and the failure morphology reveals a broken licker‐in joint, indicating design deficiencies that require further optimization. The findings of this paper can provide an important scientific basis for the lightweight and high‐strength connection design for 3D braided composites in near‐space aerostats and their flight applications.Keywords
Funding Information
- Natural Science Foundation of Hainan Province (523MS115)
- National Key Research and Development Program of China (2022YFB3901805, 2022YFB390180502)
This publication has 60 references indexed in Scilit:
- Static and dynamic failure behaviour of bolted joints in carbon fibre compositesComposites Part A: Applied Science and Manufacturing, 2013
- Deformation behavior and mechanical properties of braided rectangular pipesComposite Structures, 2010
- Longitudinal compressive behavior and failure mechanism of three-dimensional five-directional carbon/phenolic braided composites at high strain ratesMaterials Science and Engineering: A, 2009
- 2D braided composites: A review for stiffness critical applicationsComposite Structures, 2008
- Joint strength predictions for adhesive joints to be used over a wide temperature rangeInternational Journal of Adhesion and Adhesives, 2007
- Mechanical properties of three-dimensional braided compositesComposite Structures, 2004
- Review of applications for advanced three-dimensional fibre textile compositesComposites Part A: Applied Science and Manufacturing, 1999
- Microstructure/property relationships in three-dimensionally braided fiber compositesComposites Science and Technology, 1995
- Flexural and axial compressive failures of three-dimensionally braided composite l-beamsComposites, 1986
- Effective thermal expansion coefficients and specific heats of composite materialsInternational Journal of Engineering Science, 1970