Effects of Rib Arrangements on Heat Transfer and Flow Behavior in a Rectangular Rib-Roughened Passage: Application to Cooling of Gas Turbine Blade Trailing Edge
Authors:
- 1 August 1999
- journal article
- Published by Wiley in Journal of Heat Transfer
- Vol. 123 (4) , 675-681
Abstract
Experimentation was conducted to examine the heat transfer and pressure drop characteristics in a rib-roughened rectangular passage with aspect ratio 2:1 for four rib configurations: 90 deg, 75 deg, 60 deg and 45 deg oblique ribs. The ribs were attached to two opposing long side walls instead of short side walls. In this study the oblique ribs were intended to function as secondary flow inducers as well as turbulators to improve the heat transfer of the bottom wall (one of the short side walls). The results revealed that, in order to enhance the heat transfer of the bottom wall, the oblique ribs should be arranged so that the secondary flow along the ribs hits the top wall instead of the bottom wall. Flow visualization test was performed to understand the heat transfer mechanisms. It was confirmed that the heat transfer enhancement at the bottom wall was attributed to the rib-induced secondary flow where the flow along the ribs hit the top wall, turned back and carried cold air from the passage core region towards the bottom wall. The highest average heat transfer was achieved for the 60 deg rib pattern due to the strong rotational momentum of the secondary flow and higher heat transfer enhancement on the rib-roughened walls in comparison to the other three rib patterns.Keywords
This publication has 20 references indexed in Scilit:
- Effects of Rib Arrangements on Pressure Drop and Heat Transfer in a Rib-Roughened Channel With a Sharp 180 deg TurnJournal of Turbomachinery, 1997
- Local Heat Transfer in a Rotating Two-Pass Triangular Duct With Smooth WallsJournal of Turbomachinery, 1996
- Prediction of Turbulent Flow and Heat Transfer in Rotating Square and Rectangular Smooth Channels1996
- Influence of Rotation on Heat Transfer from a Two‐Pass Channel with Periodically Placed Turbulence and Secondary Flow PromotersInternational Journal of Rotating Machinery, 1995
- Experimental Heat Transfer and Friction in Channels Roughened With Angled, V-Shaped and Discrete Ribs on Two Opposite Walls1994
- Experimental Heat Transfer Investigation of Stationary and Orthogonally Rotating Asymmetric and Symmetric Heated Smooth and Turbulated ChannelsJournal of Turbomachinery, 1994
- Heat Transfer in Rotating Serpentine Passages With Selected Model Orientations for Smooth or Skewed Trip Walls1993
- Heat Transfer in Rotating Serpentine Passages With Trips Normal to the FlowJournal of Turbomachinery, 1992
- High performance heat transfer ducts with parallel broken and V-shaped broken ribsInternational Journal of Heat and Mass Transfer, 1992
- An Experimental Investigation of Heat Transfer Coefficients in a Spanwise Rotating Channel With Two Opposite Rib-Roughened WallsJournal of Turbomachinery, 1991