Topology Optimization Design Method for Acoustic Imaging Array of Power Equipment
Open Access
Abstract
Acoustic imaging technology has the advantages of non-contact and intuitive positioning. It is suitable for the rapid positioning of defects such as the mechanical loosening, discharge, and DC bias of power equipment. However, the existing research lacks the optimization design of microphone array topology. The acoustic frequency domain characteristics of typical power equipment are elaborately sorted out. After that, the cut-off frequencies of acoustic imaging instruments are determined, to meet the needs of the full bandwidth test requirements. Through a simulation calculation, the circular array is demonstrated to be the optimal shape. And the design parameters affect the imaging performance of the array to varying degrees, indicating that it is difficult to obtain the optimal array topology by an exhaustive method. Aimed at the complex working conditions of power equipment, a topology optimization design method of an acoustic imaging array for power equipment is proposed, and the global optimal solution of microphone array topology is obtained. Compared with the original array, the imaging performance of the improved LF and HF array is promoted by 54% and 49%, respectively. Combined with the simulation analysis and laboratory test, it is verified that the improved array can not only accurately locate the single sound source but also accurately identify the main sound source from the interference of the contiguous sound source.Keywords
This publication has 31 references indexed in Scilit:
- Fault Diagnosis of Bolt Loosening Based on LightGBM Recognition of Sound Signal FeaturesIEEE Sensors Journal, 2023
- A Fault Detection Method Based on Embedded Feature Extraction and SVM Classification for UAV MotorsMicroprocessors and Microsystems, 2022
- Grid-moving equivalent source method in a probability framework for the transformer discharge fault localizationMeasurement, 2022
- Study on insulation defect discharge features of dry-type reactor based on audible acousticAIP Advances, 2022
- Free-Field TDOA-AOA Sound Source Localization Using Three Soundfield MicrophonesIEEE Access, 2020
- A High-Resolution and Low-Frequency Acoustic Beamforming Based on Bayesian Inference and Non-Synchronous MeasurementsIEEE Access, 2020
- Vibro-Acoustic Methods in the Condition Assessment of Power Transformers: A SurveyIEEE Access, 2019
- Reverberation Robust Feature Extraction for Sound Source Localization Using a Small-Sized Microphone ArrayIEEE Sensors Journal, 2017
- Fast Sound Source Localization Using Two-Level Search Space ClusteringIEEE Transactions on Cybernetics, 2015
- Real Time High Accuracy 3-D PHAT-Based Sound Source Localization Using a Simple 4-Microphone ArrangementIEEE Systems Journal, 2011