In situ resin‐injection approach for repairing barely visible impact damaged carbon‐fiber reinforced epoxy laminates: Optimizing the repair parameters using Taguchi method
Authors:
Open Access
- 10 April 2023
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 44 (6) , 3372-3386
Abstract
A new portable resin injection device has been developed to repair barely visible impact damage (BVID) in carbon fiber reinforced polymer (CFRP) laminates. Repair was conducted on damaged 16‐ and 24‐ply laminates at two different ambient pressures, that is, atmospheric pressure and vacuum, using three different adhesive types, that is, neat epoxy, epoxy blended with respective halloysite nanotubes (E1HNT) and carbon nanotubes (NF100). The repair effectiveness was assessed by infrared thermography and in‐plane compression testing. All damaged laminates suffered significant degradation in fracture properties as compared to pristine laminates. According to Taguchi method, the main factor affecting the repair efficiency is the laminate ply number. The findings revealed that the optimal repair parameters corresponds to using neat epoxy or E1HNT in vacuum could restore the elastic properties and using E1HNT adhesive at atmospheric pressure could restore the fracture properties of damaged 16‐ply laminate after repair. Regardless of repair parameters, the repair efficiency for the mechanical properties of 24‐ply laminates revealed minimal restoration to the laminate pristine conditions after repairing the damaged laminates due to the complexity of BVID for allowing the adhesive to infiltrate and filled the crack structures. The choice of repair parameters was discussed based on the effectiveness of restoring elastic and fracture properties.Keywords
This publication has 33 references indexed in Scilit:
- Experimental study on barely visible impact damage and visible impact damage for repair of small aircraft composite structureAerospace Science and Technology, 2013
- A review of optimization techniques used in the design of fibre composite structures for civil engineering applicationsMaterials & Design (1980-2015), 2012
- Strength prediction of adhesively bonded repairs on carbon‐epoxy laminates by the single and double‐strap techniquesPolymer Composites, 2011
- Investigation of composite repair method by liquid resin infiltrationPlastics, Rubber and Composites: Macromolecular Engineering, 2010
- Rheological and dynamic-mechanical behavior of carbon nanotube/vinyl ester–polyester suspensions and their nanocompositesEuropean Polymer Journal, 2007
- Mechanical performance of carbon-epoxy laminates. Part II: quasi-static and fatigue tensile propertiesMaterials Research, 2006
- Functionalized composite structures for new generation airframes: a reviewComposites Science and Technology, 2005
- Review of advanced composite structures for naval ships and submarinesComposite Structures, 2001
- Impact damage characterisation of carbon fibre/epoxy composites with multi-layer reinforcementComposites Part B: Engineering, 2000
- The impact resistance of composite materials — a reviewComposites, 1991