The Effect of Bottom Ash on Fresh Characteristic, Compressive Strength and Water Absorption of Self-Compacting Concrete
- 31 October 2014
- journal article
- Published by Trans Tech Publications, Ltd. in Applied Mechanics and Materials
- Vol. 660, 145-151
Abstract
Bottom ash is a solid residue produced through combustion process in a coal-fired power plant. It has been catogarized as a waste and usually disposed in the utility disposed site. With higher demand on the power energy, more coal-power plant are constructed and abundance of bottom ash are produced. Recently, the utilization of bottom ash in the construction industry has gained the interest of researches. Since it has similiar particle size distribution as normal sand, many attempt has been made in studying it potential use in mortar and concrete. In complementary to that, this paper presents the effect of bottom ash on fresh and hardened properties of self-compacting concrete (SCC). Bottom ash is used as fine aggregate replacing sand with replacement ratio range from 0% to 30% by volume. The effects of bottom ash on the SCC were investigated by comparing the test result of SCC mixed bottom ash with control specimens (0% of bottom ash). The test result on fresh properties of the concrete mixture revealed that, as the replacement level of bottom ash increased, the slump flow, L-box passing ratio and segregation resistance ratio (SR) decreased. Nevertheless, the slump flow time (T500) result increased with the increased of bottom ash content. The results show that the porosity and the irregular shape of the bottom ash particle has great influence on workability and viscosity of the fresh concete. The compressive strength and water absorption test are carried out on the sample at curing time of 7 and 28days. In terms of strength, the use of bottom ash in the production of SCC has increased the compressive strength of the concrete up to 15% replacement level. The increase in strength show the presence of the pozzolanic reactivity in a concrete with bottom ash particle. The water absorption rate was observed to be lower with a sample which having 10% and 15% replacement level.Keywords
This publication has 15 references indexed in Scilit:
- Utilization of limestone powder to improve the properties of self-compacting concrete incorporating high volumes of untreated rice husk ash as fine aggregateConstruction and Building Materials, 2013
- Effect of incinerator bottom ash properties on mechanical and pore size of blended cement mortarsMaterials & Design (1980-2015), 2012
- Influence of water/powder ratio on strength properties of self-compacting concrete containing coal fly ash and bottom ashConstruction and Building Materials, 2012
- Properties of the autoclaved aerated concrete produced from coal bottom ashJournal of Materials Processing Technology, 2009
- Usage of coal combustion bottom ash in concrete mixtureConstruction and Building Materials, 2008
- The effect of silica fume and high-volume Class C fly ash on mechanical properties, chloride penetration and freeze–thaw resistance of self-compacting concreteConstruction and Building Materials, 2008
- Evaluation of concrete incorporating bottom ash as a natural aggregates replacementWaste Management, 2007
- Self-compacting concrete: An analysis of 11 years of case studiesCement and Concrete Composites, 2006
- Physical and mechanical properties of cement-based products containing incineration bottom ashWaste Management, 2003
- Self-compacting concrete incorporating high volumes of class F fly ashCement and Concrete Research, 2001