Three-dimensional modelling of multilayered asphalt concrete pavement structures: strain responses and permanent deformation
Authors:
- 20 April 2015
- journal article
- review article
- Published by Taylor & Francis in Road Materials and Pavement Design
- Vol. 16 (3) , 727-740
Abstract
In any given asphalt concrete (AC) pavement structure, the permanent deformation (PD) in each AC layer has an influence and contributes differently to the total pavement rutting. The degree of influence will generally vary as a function of the AC modulus and layer thickness. Presently, most of the AC material/layer PD characterisation and analyses are based on laboratory and/or field testing in combination with stress-strain modelling under assumed circular and uniformly distributed wheel loading. In this paper, a three-dimensional finite element program, ANSYS, incorporating measured vertical tyre–pavement contact pressure (TPCP) was utilised for computing the PD of each AC layer with different variables such as the AC layer modulus, AC layer thickness, TPCP levels, vertical wheel loads, and tyre inflation pressure. A strain energy concept was also proposed for evaluating the PD rate and contribution of each AC layer. The corresponding results indicated the following: (1) the PD contribution of each AC layer varies as a function of the AC modulus as theoretically expected; (2) the intermediate AC layer significantly contributes to lateral deformation; however, both the intermediate and top AC layers significantly contribute to vertical PD; (3) the AC layer thickness and the magnitude of the lateral TPCP hardly influence the PD of the intermediate AC layer; (4) the PD influence of small light trucks can be quite substantial depending on the loading conditions and cannot be neglected in the analysis of this nature; (5) the distribution of the TPCP has a very significant influence on the PD of the top AC layer and is more pronounced as the TPCP gets more non-uniformly distributed.Keywords
This publication has 17 references indexed in Scilit:
- Comparing finite element and constitutive modelling techniques for predicting rutting of asphalt pavementsInternational Journal of Pavement Engineering, 2012
- Three-Dimensional Simulations of Asphalt Pavement Permanent Deformation Using a Nonlinear Viscoelastic and Viscoplastic ModelJournal of Materials in Civil Engineering, 2011
- Nonlinear Pavement Foundation Modeling for Three-Dimensional Finite-Element Analysis of Flexible PavementsInternational Journal of Geomechanics, 2009
- Difference between In Situ Flexible Pavement Measured and Calculated Stresses and StrainsJournal of Transportation Engineering, 2006
- Viscoplastic modeling of asphalt mixes with the effects of anisotropy, damage and aggregate characteristicsMechanics of Materials, 2005
- Effects of Nonuniform Tire Contact Stresses on Pavement ResponseJournal of Transportation Engineering, 2005
- Linear viscoelastic behaviour of bituminous materials: From binders to mixesRoad Materials and Pavement Design, 2004
- Modeling Measured 3D Tire Contact Stresses in a Viscoelastic FE Pavement ModelInternational Journal of Geomechanics, 2002
- Measurement of Contact Stresses for Different Truck Tire Types To Evaluate Their Influence on Near-Surface Cracking and RuttingTransportation Research Record: Journal of the Transportation Research Board, 1999
- Computational modelling of impact damage in brittle materialsInternational Journal of Solids and Structures, 1996